If you're seeing this message, it means we're having trouble loading external resources on our website.

If you're behind a web filter, please make sure that the domains *.kastatic.org and *.kasandbox.org are unblocked.

Main content

Diffusion and osmosis

Diffusion refers to the movement of molecules from an area of high concentration to an area of lower concentration. Osmosis is a type of diffusion specifically for water molecules moving across a semi-permeable membrane. A concentration gradient is the difference in concentration of a substance between two areas, which drives diffusion or osmosis. Created by Sal Khan.

Want to join the conversation?

  • leaf green style avatar for user Sai
    What is Facilitated Diffusion? Also, What is Endocytosis, Phagocytosis, Pinocytosis?
    (137 votes)
    Default Khan Academy avatar avatar for user
    • blobby green style avatar for user sasmon
      Unfortunatly, the previous answer was not correct. Facilitated diffusion refers to a type of passive diffusion (requires no energy) where channels are lined by proteins that facilitate the diffusion of larger molecules through a semi permeable membrane. In the video the instructor talks about the sugar molecules being too large to simply passively diffuse through the membrane. One way to allow those molecules (either prevented by size or hydrophilicity)to pass through this membrane is to place a protein channel that makes this passage possible. The actual process of diffusion is then an energetically free process. (We are not considering the energy costs associated with making the protein channel.)

      The previous poster was also incorrect when explaining pinocytosis. Pinocytosis is a type of cellular intake mechanism that can be described as a non-selective "gulp". The cell invaginates and takes in a relatively large quantity of the surrounding medium and digests any useable contents. This is done without the need for any receptor/ligand mechanism as is used in phagocytosis.

      I hope this helps!
      (186 votes)
  • aqualine ultimate style avatar for user Lynn
    At , why is it more likely for the water to enter the membrane than exit? From memorization, I know that this is the case, but I don't understand why the sugar molecule blocking the water molecules from exiting the membrane wouldn't also block them from entering the membrane? I thought it was just because the concentration of water was lower inside the membrane, because there were also sugar molecules in there.
    (51 votes)
    Default Khan Academy avatar avatar for user
    • aqualine ultimate style avatar for user Shivangi Mishra
      well it isn't always that the water only enters a cell it can be both ways...let me give u some simple examples that u may be experiencing in your daily life.You must be knowing we add a lot of salt in pickles or lot of sugar in jams...and this is to preserve it.Well it is quite simple when the solute (sugar or salt) is more nd water contentis lesser than in bodies of microorganisms (eg bacteria or protozoa has more water inside them than water available outside)so what happens is water goes from higher concentration to lower concentration that means the water from there bodies come out and they shrink and finally die..thus food is preserved..

      now second example of osmosis ..when u go to a swimming pool and stay in there for a lon time you see a certain type of swelling in your hand ..this is also because of osmosis ..the water in swimming pool is more than water in the cells of our fingers so water move sfrom higher concentration to lower i.e, from swimming pool into the cells of our fingers through semi permeable membrane....Thus osmosis is hopefully now explained in both ways.....btw i aint that good at explaining yet hope it helps u a bit ;)
      (12 votes)
  • leafers seed style avatar for user Byron Lee
    I'm confused on the definition of Concentration Gradient. I went online and searched for the definition and one website stated that it was the gradual change in the concentration of solutes in a solution as a function of distance through a solution. If this also applies to Osmosis, this definition doesn't make sense because water is a solvent, and not a solute. So, does this mean that this definition is incorrect?
    (23 votes)
    Default Khan Academy avatar avatar for user
    • orange juice squid orange style avatar for user CarlBiologist
      When talking about biological membranes, the phrase "concentration gradient" is used to describe unequal concentrations of solutes on either side of the membrane. I didn't just watch the video so Sal may have misspoke, but Osmosis comes about when the solutes can't pass through the membrane to equalize a large gradient, so instead water does. This is why often when you put cells in a salt solution, cells will shrivel up.
      (22 votes)
  • blobby green style avatar for user sean10350
    Can osmosis happen in other solvents or only water?
    (13 votes)
    Default Khan Academy avatar avatar for user
  • piceratops tree style avatar for user riley sanford
    At and , what would happen if all of the mass in the containers was at absolute zero? Would diffusion take place at all?
    (10 votes)
    Default Khan Academy avatar avatar for user
    • piceratops ultimate style avatar for user singhalmanu9
      Well, absolute zero is the temperature which is defined as the temperature needed so that all kinetic energy of particles stops. Since diffusion requires particles to move, molecules at 0 K cannot diffuse. Of course, if gravity is pulling them downward, then the molecules can diffuse. Very interesting question...
      (4 votes)
  • blobby green style avatar for user 14_mrouse
    Can somebody explain what a concentration gradient is?
    (15 votes)
    Default Khan Academy avatar avatar for user
    • spunky sam blue style avatar for user Partha Sarathy
      the gradual difference in the concentration of solutes in a solution between two regions. In biology, a gradient results from an unequal distribution of ions across the cell membrane.

      gradient - a graded change in the magnitude of some physical quantity or dimension

      For example, think of a balloon. The air inside the balloon is more concentrated than the air outside of it. There is a concentration gradient because of the differences in concentration. And what happens when you release the tip of the balloon?
      (8 votes)
  • leafers sapling style avatar for user John Lemon
    Why is phagocytosis often called "cell eating?"
    (17 votes)
    Default Khan Academy avatar avatar for user
  • leafers seedling style avatar for user SawayaFJ
    When did scientists figure out that we had cells in our body?
    (5 votes)
    Default Khan Academy avatar avatar for user
  • ohnoes default style avatar for user Karen Ortiz
    What is Facilitated Diffusion?
    (5 votes)
    Default Khan Academy avatar avatar for user
  • duskpin ultimate style avatar for user C4LOwenZ
    Is osmosis similar to simple diffusion in the respect that simple diffusion doesn't require energy, or is osmosis more like active transport, where ATP is required to move particles across the membrane?
    (4 votes)
    Default Khan Academy avatar avatar for user

Video transcript

In this video, I want to cover several topics that are all related. And on some level, they're really simple, but on a whole other level, they tend to confuse people a lot. So hopefully we can make some headway. So a good place to start-- let's just imagine that I have some type of container here. Let's say that's my container and inside of that container, I have a bunch of water molecules. It's just got a bunch of water molecules. They're all rubbing against each other. It's in its liquid form, this is liquid water. and inside of the water molecules, I have some sugar molecules. Maybe I'll do sugar in this pink color. So I have a bunch of sugar molecules right here. I have many, many more water molecules though. I want to make that clear. Now in this type of situation, we call the thing that there's more of, the solvent. So in this case, there's more water molecules and you can literally just view more as the number of molecules. I'm not going to go into a whole discussion of moles and all of that because you may or may not have been exposed to that yet, but just imagine whatever there's more of, that's what we're going to call the solvent. So in this case, water is the solvent. And whatever there is less of-- in this case, that is the sugar-- that is considered the solute. It doesn't have to be sugar. It can be any molecule that there's less of, in the water, in this case. And we say that the sugar has been dissolved into the water. And this whole thing right here, the combination of the water and the sugar molecules, we call a solution. We call this whole thing a solution. And a solution has the solvent and the solute. The solvent is water. That's the thing doing the dissolving and the thing that is dissolved is the sugar. That's the solute. Now all of this may or may not be review for you, but I'm doing it for a reason-- because I want to talk about the idea of a diffusion. And the idea is actually pretty straightforward. If I have, let's say, the same container. Let me do it in a slightly different container here, just to talk about diffusion. We'll go back to water and sugar-- especially back to water. Let's say we have a container here and let's say it just has a bunch of-- let's say it just has some air particles in it. It could be anything-- oxygen or carbon dioxide. So let me just draw a couple of air molecules here. So let's say that that is a gaseous-- just for the sake of argument-- gaseous oxygen. So each of this is an O2-- each of those, right? And let's say that this is the current configuration, that all of this is a vacuum here and that there's some temperatures. So these water molecules, they have some type of kinetic energy. They're moving in some type of random directions right there. So my question is, what is going to happen in this type of container? Well, any of these guys are going to be randomly bumping into each other. They're more likely to bump into things in this down-left direction than they are in the up-right direction. So if this guy was happening to go in this down-left direction, he's going to bump into something and then ricochet into the up-right direction. But in the up-right direction, there's nothing to bounce into. So in general, everything is moving in random directions, but you're more likely to be able to move in the rightward direction. When you go to the left, you're more likely to bump into something. So it's almost common sense. Over time, if you just let this system come to some type of equilibrium-- I'm not going to go into detail on what that means. You can watch the thermodynamics videos if you'd like to see that. You'll eventually see the container will look something like this. I can't guarantee it. There's some probability it would actually stay like this, but very likely that those five particles are going to get relatively spread out. This is diffusion and so it's really just the spreading of particles or molecules from high concentration to low concentration areas, right? In this case, the molecules are going to spread in that direction from a high concentration to a low concentration area. Now you're saying, Sal, what is concentration? And there's many ways to measure concentration and you can go into molarity and molality and all of that. But the very simple idea is, how much of that particle do you have per unit space? So here, you have a lot of those particles per unit space and here you have very few of those particles per unit space. So this is a high concentration and that's a low concentration. So you could imagine other experiments like this. You could imagine a solution like-- let's do something like this. Let's say I have two containers. Let's go back to the solution situation. This was a gas, but I started off with that example so let's stay with that example. So let's say that I have a door right there that's larger than either the water or the sugar molecules. On either side, I have a bunch of water molecules. So I have a lot of water molecules. So if I just had water molecules here-- they're all bouncing around in random directions-- and so the odds of a water molecule going this way, equivalent to odds of a water molecule going that way, assuming that both sides have the same level of water molecule, otherwise the pressures would be different. But let's say that the top of this is the same as the top of this. So there's no more pressure going in one direction or another. So if for whatever reason, a bunch more water molecules were going in the rightward direction, then all of a sudden this would fill up with more water and we know that that isn't likely to occur. So this is just two containers of water. Now let's put some solute in it. Let's dissolve some solute in it and let's say we do all the dissolving on the left-hand side. So we put some sugar molecules on the left-hand side. And these are small enough to fit through this little pipe. That's one assumption that I'm making. So what's going to happen? All of these things have some type of kinetic energy. They're all bouncing around. Well, over time, the water's going back and forth. This water molecule might go that way. That water molecule might go that way, but they net each other out, but over time one of these big sugar molecules will be going in just the right direction to go through-- maybe this guy's, instead of going that direction, he starts off going in that direction. He goes just through this tunnel connecting the two containers and he'll end up there, right? And this guy will still be bouncing around. There's some probability he goes back, but there's still more sugar particles here than there. So there's still more probability that one of these guys will go to that side than one of these guys will go to that side. So you can imagine if you're doing this with gazillions of particles-- I'm only doing it with four-- over time, the particles will have spread out so that their concentrations are roughly equal. So that maybe you'll have two here over time. But when you're only dealing with three or four or five particles, there's some probability it doesn't happen, but when you're doing it with a gazillion and they're super small, it's a very, very, very high likelihood. But anyway, this whole process-- we went from a container of high concentration to a container of low concentration and the particles would have spread from the low concentration container to the high concentration container. So they diffused. This is diffusion. And just so that we learn some other words that tend to be used with the idea of diffusion-- when we started off, this had a higher concentration. The left-hand side container had higher concentration. It's all relative, right? It's higher than this guy. And this right here had a lower concentration. And there are words for these things. This solution with a high concentration is called a hypertonic solution. Let me write that in yellow. Hyper, in general, meaning having a lot of something, having too much of something. And this lower concentration is hypotonic. You might have heard maybe one of your relatives, if they haven't had a meal in awhile say, I'm hypoglycemic. That means that they have not-- they're feeling lightheaded. There's not enough sugar in their bloodstream and they want to pass out so they want a meal. If you just had a candy bar, maybe you're hyperglycemic-- or maybe you're just hyper in general. So these are just good prefixes to know, but hypertonic-- you have a lot of the solute. You have a high concentration. And then in hypotonic, not too much of the solute so you have a low concentration. These are good words to know. So in general, diffusion-- if there's no barriers to the diffusion like we had here, you will have the solute go from a high concentration or hypertonic solution if they can travel to a hypotonic solution, to a hypo, where the concentration is lower. Now let's do an interesting experiment here. We've talked about diffusion and so far we've been talking about the diffusion of the solute, right? And in general-- and this is not always the case-- if you want to be as general as possible, the solute is whatever you have less of, the solvent is whatever you have more of. And the most common solvent tends to be water, but it doesn't have to be water. It could be some type of alcohol. It could be mercury. It could be a whole set of molecules, but water in most biological or chemical systems tends to be the most typical solvent. It's what other things are dissolved into. But what happens if we have a tunnel where the solute is too big to travel, but water is small enough to travel? Let's think about that situation. In order to think about it, I'm going to do something interesting. Let's say we have a container here. Actually, I won't even draw a container. Let's just say we have an outside environment that has a bunch of water. This is the outside environment and then you have some type of membrane. Water can go in and out of this membrane. So it's semi-permeable. Well, it's permeable to water, but the solute cannot go through the membrane. So let's say that the solute is sugar. So we have water on the outside and also inside the membrane. So these are little small water molecules. This is a membrane right here. And let's say that we have some sugar molecules again-- I'm just picking on sugar. It could have been anything. So we have some sugar molecules here that are just a little bit bigger-- or they could be a lot bigger. Actually, they're a lot bigger than water molecules. You have a bunch of-- and I only draw four, but you have a gazillion of them, right? You have that much more water molecules. I'm just trying to show you have more water molecules than sugar molecules. And this membrane is semi-permeable. Permeable means it allows things to pass. Semi-permeables means it's not completely permeable. So semi-permeable-- in this context, I'm saying I allow water to pass through the membrane. So water can pass, but sugar cannot. Sugar is too large. So if we were to zoom in on the actual membrane itself-- maybe the membrane looks like this. I'm going to zoom in on this membrane. So it has little holes in the membrane, just like that. And maybe the water molecules are about that size. So they can go through those holes. So the water molecules can go back and forth through the holes, but the sugar molecules are about that big. So they cannot go through that hole. They're too big for this opening right here to go back and forth between them. Now what do you think is going to happen in this situation? So first of all, let's use our terminology. Remember, sugar is our solute. Water is our solvent. Semi-permeable membrane. Which side of the membrane has a higher or lower concentration of solute? Well, the inside does. The inside is hypertonic. The outside has a lower concentration so it's hypotonic. Now, if these openings were big enough, based on what we just talked about-- these guys are bouncing around, water is travelling in either direction, and equal probability or-- actually I'm going to talk about that in a second. If everything was wide open, it would be equal probability, but if it was wide open, these guys eventually would bounce their ways over to this side and you'd probably end up with equal concentrations eventually. And so you would have your traditional diffusion, where high concentration of solute to low concentrations of solute. But in this case, these guys-- they can't fit through the hole. Only water can go back and forth. If these guys were not here, water would have an equal likelihood of going in this direction as they would be going in that direction, a completely equal likelihood. But because these guys are on the right-hand side of-- or in this case, on the inside of our membrane. This is our inside of our membrane zoomed up-- it's less likely because these guys might be in the approach position of the holes-- that's slightly less likely for water to be in the approach position for the holes so it's actually more probable that water could enter than water exit. And I want to make that very clear. If these sugar molecules were not here, obviously it's equally likely for water to go in either direction. Now that these sugar molecules are there, these sugar molecules might be on the right-hand side. They might be blocking-- I guess the best way to think about it is blocking the approach to the hole. They'll never be able to go through the hole themselves and might not even be blocking the hole, but they're going in some random direction. So if a water molecule was approaching-- it's all probabilistic and we're dealing with gazillions of molecules-- it's that much more likely to be blocked to get outside. But the water molecules from the outside-- there's nothing blocking them to get in so you're going to have a flow of water inside. So in this situation, with a semi-permeable membrane, you're going to have water. You're going to have a net inward flow of water. And so this is kind of interesting. We have the solvent flowing from a hypotonic situation to a hypertonic solution, but it's only hypotonic in the solute. But water-- if you flip it the other way-- if you've used sugar as the solvent, then you could say, we're going from a high concentration of water to a low concentration of water. I don't want to confuse you too much. This is what tends to confuse people, but just think about what's going to happen. No matter in what situation, the solution is going to do what it can to try to equilibriate the concentration. To make the concentrations on both sides as close as possible. And it's not just some magic. It's not like the solution knows. It's all based on probabilities and these things bumping around, but in this situation, water is more likely to flow into the container. So it's actually going to go from the hypotonic side when we talk about low concentration of solute to the side that has high concentrations of solute, of sugar-- and actually, if this thing is stretchable, more water will keep flowing in and this membrane will stretch out. I won't go to too much detail here, but this idea of water-- of the solvent-- if in this case, water is the solvent-- of water as a solvent diffusing through a semi-permeable membrane, this is called osmosis. You've probably heard learning by osmosis-- if you put a book against your head, maybe it'll just seep into your brain. Same idea. That's where the word comes from. This idea of water seeping through membranes to try to make concentrations more equal. So if you say, well, I have high concentration here, low concentration here. If there was no membrane here, these big molecules would exit, but because there's this semi-permeable membrane here, they can't. So the system just probabilistically-- no magic here-- more water will enter to try to equilibriate concentration. Eventually-- if maybe there's a few molecules out here-- not as high concentration here-- eventually if everything was allowed to happen fully, you'll get to the point where you have just as many-- you have just as high concentration on this side as you have on the right-hand side because this right-hand side is going to fill with water and also probably become a larger volume. And then, once again, the probabilities of a water molecule going to the right and to the left will be the same and you'll get to some type of equilibrium. But I want to make it very clear-- diffusion is the idea of any particle going from higher concentration and spreading into a region that has a lower concentration and just spreading out. Osmosis is the diffusion of water. And usually you're talking about the diffusion of water as a solvent and usually it's in the context of a semi-permeable membrane, where the actual solute cannot travel through the membrane. Anyway, hopefully you've found that useful and not completely confusing.