Main content

### Course: Geometry (FL B.E.S.T.) > Unit 8

Lesson 1: Circle basics# Area of a circle intuition

Using triangles to create an informal argument for the area of a circle formula.

## Want to join the conversation?

- I know this is off topic, but what is a seven sided polygon called?(18 votes)
- 7 sides is a heptagon.(17 votes)

- Hi! Why did he divide the 2(pi)r*r expression at the end by two? Thanks you :^)(7 votes)
- Hi. This expression was divided by two at the end because the original expression was n(b x a/2), which can also be written as just
**n x b x a x 1/2**using properties of multiplication.**n x b**, the number of sides of the polygon multiplied by the length of those sides (the perimeter of the polygon) gets closer to the circle's circumference as**n**, the number of sides, approaches infinity. You can imagine adding more sides to the polygon and watch the perimeter getting so close to the circumference of the circle, but never quite get there since you would need an infinite number of sides.

The circumference is equal to**2 x (pi) x r**, so you can replace**n x b**with**2 x (pi) x r**in our new equation where**n**is essentially infinity, and the perimeter of the polygon becomes the circumference of the circle.**a**gets closer to the radius of the circle as**n**increases, so you can replace**a**with**r**, and the**1 / 2**stays the same. The whole expression becomes**2 x (pi) x r x r x 1 / 2**, the**2**and**1 / 2**cancel out, and the expression simplifies to just *(pi) x r x r*, or *(pi)r^2*, the formula for the area of a circle.

I hope this helps! :) I think your confusion was just from not quite understanding that the expression was just n(b x a/2) with the variables replaced with what they approach as n approaches infinity, and that expression contained a 1 / 2 from the area for a triangle formula, which Sal just wrote by dividing the rest of the expression by two.(20 votes)

- Even if n approaches infinity the area of the circle won't be extremely precise. Wouldn't it be off by a little(5 votes)
- In the sense that we can only evaluate the area for finite 𝑛, the answer is yes, we will always be a little off even for very large 𝑛. However, the concept Sal is getting at here is the notion of a
*limit*. That is, what does some function approach as the input approaches some value? In this case, even though the area function only approximates the area of a circle for all finite 𝑛, we can take the limit as 𝑛 → ∞ which will give us the area of the shape that this process is approaching as we increase 𝑛 (namely a circle). The concept of the limit is easily misunderstood when it is first introduced and there are rigorous definitions that make it even harder to understand, but hopefully you see the intuition behind Sal's logic. We are not looking at subcases for finite 𝑛, rather we are seeing what the area*approaches*as 𝑛 gets arbitrarily large (𝑛 → ∞).

Also, I highly recommend to anyone who asks about calculus that they focus on algebra, trigonometry, and geometry first before studying calculus. So don't worry about limits now if you haven't made yourself familiar with everything that precedes it.

Comment if you have questions!(14 votes)

- so theoretically a circle is just an infinite sided polygon?(5 votes)
- Infinity is not a number, it is a concept, so having infinite sides has no real meaning. You have to go to calculus and limits to sort of get to where you want to get.(9 votes)

- But saying that the area of a circle is approaching πr^2 is different than saying: the area IS πr^2...right?(5 votes)
- This is better understood when you take precalculus because Sal is talking about limits. Sal states that as n approaches infinity, the area approaches πr^2 which is a true statement, as you add more and more sides to the polygon, the area gets closer and closer to the formula. If there were such a thing as an infinite number of sides (a circle does not have sides) which would mean each point on the circle were considered a side, then it would reach the area formula. The theory might be beyond what you have seen in math before.(6 votes)

- At about7:30minutes into the video, Sal said, n*b is approaching the circumference, but how is this possible?(5 votes)
- hi, I'm here to help. when sal said n*b is approaching the circumference he also mentioned when n approaches infinity and multiplied by b it will approach the circumference since the space will become 0.I hope that I have helped you.If not ask Sal.(3 votes)

- How do you find the area of a hexagon(1 vote)
- There's always more than one way to do things in math, but the most simple way is to just use the formula
**0.5 × P × a**, where P is the perimeter, and a is the apothem (see bottom if a new word). This formula only works if the hexagon is regular, however.

An apothem is a line segment from the center to one of the sides, such that the line perpendicularly bisects the side it touches.(6 votes)

- When all those properties approach the properties of a circle, does it ever become it?(2 votes)
- No. For a circle to be perfect, we would need to measure an infinite number of points around the circle's circumference to know for sure. A perfect circle is impossible to achieve in real life. From subatomic particles to carefully built structures, nothing in the physical world can be a perfect circle.(1 vote)

- i dont get this(2 votes)
- Then you will fail, JK you just need to study more of it and learn to understand this(1 vote)

- Hi! Do you guys have a video on the various parts of a circle like the chord,secant,tangent,etc etc.(2 votes)
- https://www.khanacademy.org/math/geometry/hs-geo-circles/hs-geo-circle-basics/v/language-and-notation-of-the-circle

the previous video, on Circles Glossary.

Hope that helps!(1 vote)

## Video transcript

- [Voiceover] What I'd
like to do in this video is make an informal argument for why the formula for
the area of a circle is Pi r squared. And we're gonna start just with the most traditional
definition of the number Pi and that's that and I'll just do it here in a corner some place that Pi is equal to the ratio of the circumference and
the diameter of the circle or the ratio of the circumference to the diameter of a circle or, of course, we could write this as ratio of the circumference to, instead of the diameter, I could write two times the radius or I can multiply both sides
times two times the radius and we get our traditional
formula for the circumference, for the circumference of a circle, but once again, this literally
just comes straight out of the definition for the number Pi. The number Pi is defined as the ratio between the circumference
and the diameter, so you just multiply both sides out of it times the diameter, you
get the circumference is equal to Pi times the diameter. Now, we have the circumference
formula right here, once again, this comes out
of the definition of Pi, but from this, I'd like to at
least get an intuitive feel for why the area formula
is given by Pi r squared and to think about that,
we're going to approximate the area of polygons,
the areas of polygons, that are inscribed in a circle. So over here, I have this, what's this? There's a five-sided
polygon right over here and its area is going to be equal to, so the area of this polygon, it's going to be five times the area of each of those triangles and the area of each of those triangles, the height is a, the base is b, so it's going to be base times height or height times base times 1/2. So this, once again,
five times ab over two, it's not that good of an approximation. This would be the area of
just the inscribed polygon, so we're definitely underestimating the area of the entire circle or leaving out all of these little, these little chunks
outside of the polygon, but still inside of the circle. But as we add more size to the polygon, we see that we're leaving out less. We see, when we have now, this is a one, two, three, four, five, six, seven-sided polygon, we're leaving a little bit less. We're underestimating still, but we're underestimating by less. This area that we're giving up isn't as large as this
area right over here. So in this approximation,
we have, what did I say? Seven triangles? One, two, three, four, five, six, seven triangles. And the area of each of those triangles is once again ab over two. Now, a and b here are different
than a and b over here, and notice what's happening. As we increase, as we increase the number of triangles, not only is it approximating
the area of the circle better, but a is getting longer. And you can see, you could imagine, as we increase many,
many, many more triangles, a is going to approach r. Now another thing to think
about is what is seven, what is seven times b approaching? So we're saying that a is approaching r as we add more of these
sides of the polygon, as we add more triangles, now what is the number of triangles times the base of the triangle,
what is that approaching? Well this is going to
approach the perimeter of the, or this is going to be the
perimeter of the polygon, so seven times b is that plus, let me actually, let me draw this, it's that plus that plus that, I think you get the point, plus that, plus that, plus that, plus that. So once again, seven, let
me write this at seven, times b, that is the
perimeter of the polygon, perimeter, perimeter of the polygon. So think about what's happening. As we have more and more
sides of the polygon, our a, our height of
each of our triangles, is going to approach our radius, is going to approach the radius. It's going to get the height
of each of the triangles. It's gonna get longer and longer, it's gonna approach the radius as we have, as we approach an infinite
number of triangles, and then the number of polygons we have, not the number of polygons, the number of sides we
have times the bases, that's going to be the
perimeter of the polygon and as we add more and more sides, as we add more and more sides, the perimeter of the polygon
is going to approach, is going to approach, is going to approach the
circumference of the circle. I'll write it out, circumference, circumference, and you'll see that even
more clearly right over here. So, once again, how many
sides do I have here? I have one, two, three, four, five, six, seven, eight, nine, 10 sides, so this, I can write the
perimeter of the polygon as 10 times b and then if I multiply
that times a over two, if I multiply that times, we'll use another color. a over, let me just write it like this, times a over two, I'm once again approximating
the area of the circle 'cause a times b over two, that's the area of each of these triangles and then I have 10 of these triangles, but now let's think about
this more generally. Let's think about it if I were to have n, if I were to have an n-sided polygon, so I have n-sided polygon, then I'd be approximating the area as n times b, n times b, we see this right over here. When n is equal to 10,
you have 10 times b. So it's n times b times a over two. Times a over two. I just wrote, this isn't something mysterious. The base times the height divided by two, this right over here, that's the area of each triangle and then I'm gonna have
n of these triangles, so this is our approximation for the area, so let me write this, the area is going to be
approximately that right over there. It's going to be n, the
number of triangles I have, times the area of each triangle. Now what's going to happen, as n approaches infinity, as I approach having an
infinite sided polygon, as I have an infinite number of triangles, so let's just think this
through a little bit. 'cause this is where it gets interesting. Now this is the informal argument. To do this better, I'd have to dig out a little bit of calculus, but
this gives you the essence. So let's just think about what happens as n approaches infinity. So, as n approaches infinity, we've already said, as we
have more and more sides and we have more and more triangles, a approaches r, so let's write that down. So, a is going to approach r, the height of the triangles is
going to approach the radius and what else is going to happen? Well, n times b, the
perimeter of the polygon, the perimeter of the polygon is going to approach the circumference. So, a is going to approach r and n times b is going to
approach the circumference, is going to approach the circumference, or another way of thinking about it, if it's approaching the circumference, we could say that n times b is going to approach
two Pi times the radius 'cause that's what the circumference is going to be equal to. So, if a is approaching the radius and nb is approaching two Pi r, well then, what is the entire, what is the area of, what is the area of our polygon or what is the area of
our polygon going to, or, the area of our circle going to be? Well, it is going to approach, it is going, or I should
say, the area of our polygon is going to approach, nb is going to approach two Pi r, nb is going to approach two Pi r. Instead of nb, I'm writing two Pi r there. a is going to approach r. a is going to approach r, and then I'm dividing it, and then I am dividing it by two. So as n approaches infinity, as we have infinite number
of sides of our polygon, an infinite number of triangles, the area of our polygon
will approach this, which is equal to what? Well you have two divided two and then Pi r times r is equal to Pi r squared. So as we approach having
infinite number of triangles and infinite, I wanna keep that there, infinite number of sides, we see that we approach
the area of the circle and as we approach the area of the circle, we are approaching Pi r squared. So hopefully this gives
you an intuitive sense why this right over here is the formula for the area of a circle. You could think about it as the area of an infinite sided polygon that is inscribed in the circle, which will be equal to
the area of the circle.