Main content

### Course: Oscillations and waves (Essentials) - Class 11th > Unit 2

Lesson 1: Why and how do things oscillate?# Definition of amplitude and period

David defines the terms amplitude and period for simple harmonic motion and shows how to find them on a graph. Created by David SantoPietro.

## Want to join the conversation?

- Shouldn't the amplitude get lower and lower with each cycle? If you imagine a spring that has been extended and then let go, it wouldn't come back to the original position after one cycle, rather it would be slightly less displaced. Am I missing something?(39 votes)
- This video is ignoring friction and air resistance.(23 votes)

- If there is a spring on the ceiling and I pulled it down and I let go would the amplitude and the period decrease until the spring stops ocillating because of gravity or would they stay constant(10 votes)
- from my point of view the problem is that at the equilibrium position the net forces acting on the body is not zero as there is air lifting force (during motion)

first you pull the weight down so it makes amplitude A1

it rebounds upward to make an amplitude A2

where A2 < A1 because of the body weight and air lifting force

then i think it would make damping oscillation until it stops but i don't know how the acting forces will cause this damping oscillation(7 votes)

- I have a confusion between the time period and the wavelength. Could you help me out?(3 votes)
- Think of a water wave traveling on the ocean...

wavelength is a distance between two nearby peaks.

time period is the time it takes the wave to travel a distance of one wavelength

also

if a seagul was bobbing up down as the waves pass, the time period is how long it would take to go down, up and back to its original posiiton(16 votes)

- what is the unit of Amplitude ??(4 votes)
- Some measure of displacement. Perhaps cm.(5 votes)

- Is like valley is the amplitude?(2 votes)
- Yes. My mistake. Amplitude is level ground up to hill or level ground to bottom of valley

my bad :)(4 votes)

- what is the value of constant k(2 votes)
- Varies, in this example, from spring to spring. Some can be stiffer than others, meaning that a small displacement of the spring creates a huge force, i.e. the value of k is larger.(2 votes)

- Is it possible that maximum displacement on one side is not equal to max. displacement on the other side? Both are usu. equal to amplitude. But is it even possible, say it is an old worn-out spring? Is it still a wave if it is not?(2 votes)
- Take for example, a spring anchored at x = 0 with a mass at rest at x = x_1. If the mass is then displaced and released at rest at x > 2 * x_1, our simple picture breaks no matter how perfect the spring is. Your answer is that while, yes, the the graph, as described in the video, of position over time will still resemble a wave, it is not precisely a sine wave for extreme values.(1 vote)

- why distance between crests and troughs are equal?

and why this distance is two times of distance between a crest and trough?(1 vote)- The compressive and tensile force of a spring described as a simple harmonic oscillator are equal in magnitude but opposite in direction (F = -kx). Notice that this equation results in an F of equal magnitude if we invert x. As for your second question, wavelength is defined in this way because it is easier think about the wavelength as fundamental to the wave when one wavelength represents all "parts of the wave" exactly one time.(1 vote)

- If a bob in a pendulum moves in a circular or elliptical path and not in to and fro motion will it be an oscillation.(3 votes)
- Oscillations are to and fro motions, if Anybody repeats it motion it is called Periodic. every oscillation is periodic but every periodic is not an oscillation . hope it helps:)(0 votes)

- the equation of motion for an oscillator in vertical shm is giving by (0.10m)sin(100 rad/s). Calculate: a) amplitude b) frequency c)period of this mootion(2 votes)

## Video transcript

- [Instructor] Alright so
there's some terminology you gotta get used to when dealing with simple
harmonic oscillators because people and books
and teachers and professors are gonna throw these
terms around like crazy, and if you are not used to them, it all can sound like
mathematical witchcraft. So the first term you gotta know is that if you displace
a mass from equilibrium, and why wouldn't you do that. That's how you get the thing to oscillate, by displacing it from equilibrium. The maximum magnitude of displacement, so this amount right here,
whatever that distance is here, is called the amplitude. So we represent the
amplitude with a capital A, and it's called the amplitude, and it's defined to be the
maximum magnitude of displacement for that oscillator. So if this mass only ever
makes it this far away, so from here to here. And I'm drawing arrows,
but this is not a vector. It's the magnitude. Right?
Magnitude of the displacement. So it's the magnitude of the vector, so it's always positive. So we can draw that over here. If we want to, we can just
say this amplitude here. This would also be the amplitude, because we're just talking about the maximum magnitude of displacement. So it's gonna get displaced
equally on either side of the equilibrium position
and that maximum amount is called the amplitude. So in other words, if I pulled
this mass back 20 centimeters then that means 20 centimeters
would be the amplitude, or if you wanted it in meters
it would be point two meters, and then, that means, when it shoots through
the equilibrium position, it would also come over here
and compress this spring by 20 centimeters on this side. So it's always equal on both sides. Now there's another term
that you gotta get used to, and that's the period. So the period is represented
with a capital T. Why is the period
represented with a capital T when there's no T in the
word Period? Not sure. But capital T is kind of like time, so T might stand for time. Maybe they thought that was a good idea. Because what the period means, is the time required for an entire cycle. So what does this mean. An entire cycle? What we mean is that you
got oscillations going on. So this process is repeating itself. So in other words: if you
start with the mass over here, it's gonna eventually make it
over to this end over here, right? Goes over here,
compresses the spring, then it's gonna come
back. The time it takes, oh, that's a little hard to see, sorry. Let me draw that up here. So the time it takes for it to go to here, and then come all the way
back after this happened, the whole thing just repeats. Now it's back here, the spring is gonna pull
it back to the left, and go to the right. It's gonna pull it back to the left, push it back to the right. So this process is repeating itself. There's not something new happening. It's just the same process over and over. The time it takes to go
through one entire cycle; ie: The time it takes
to reset, essentially, once this entire system
resets to the same position, that's the period. And so it's gonna be the same. Wether I count this as from
this point back to that point, or if I imagine just
starting my clock here, from this point is gonna go over to here, then it's gonna come back here, that would also be the period, because it's the time it took to reset. So the time it takes for
this process to reset is what we call the period. It will be given in seconds, so for the sake to making
this a little less abstract, let's say for example, the period of this mass on
the spring was six seconds. What would that mean? It would mean that it took
six seconds for the mass to go from this point and then all the way back to that point resetting itself. Now, this is getting kind of messy. And honestly, for that
reason people often draw what the simple harmonic
oscillator looks like on a graph. It turns out to be
particularly elegant and useful to represent these ideas on a graph. Because, look it. If you
just drew what's happening, you'd be like: alright,
the mass goes here, and then there, and then
there and then there, you are drawing all over yourself. So that's kinda ugly looking. It's better to represent this on a graph. What would that look like?
So let me get rid of this. It would look like this. You would have a graph of
the horizontal position X. So what does that mean? That means this. So we are essentially
graphing what this is. This is X. The horizontal
position has a function of time. Now already you might be upset. You might be like: Wait a minute. Why did we stick the horizontal position on the vertical axis? Isn't that a dumb thing to do? Well, perhaps. But long ago physicists
decided: You know what? Time, if time is involved, we are sticking that bad
boy on the horizontal axis. This is just designated. This is just by default. It's gonna go on the horizontal axis. So if you have anything else
you wanna graph with it, that's gotta go on the vertical axis. And so unfortunately
we're gonna be graphing horizontal position on this vertical axis. What that means is that
this equilibrium position, remember this is the
point where the net force, the restoring force, that
net restoring force is zero. The only force on this mass, in this case, is the spring force which
is given by Hook's law and that means this equilibrium position is gonna be the point where X equals zero. If I want my force to be zero, I better have x equals zero. So this equilibrium position right here, this is the line right here,
let me give it a special color, this equilibrium position, is essentially just
this X equals zero line. Right? These two lines are
representing the same thing. They represent X equals zero. And if I go this way, if I
pull this mass to the right, I'm essentially going up on this graph. Because I am going towards
positive horizontal positions. And if I go to the left, if
I push this mass to the left, I'm essentially going down towards negative horizontal
positions on this graph. So hopefully that doesn't
freak you out too bad. Let me show you what this looks like. If we do displace this mass, Let's say we pull it to the right. So like we had over here, right? We have this mass, we
pull it to the right, and if we started 20 centimeters from the equilibrium position and let go. What's that gonna look like on this graph? Well it started to the right. If it starts to the right,
I'm gonna start way over here, at this point is my initial position. That means I'm gonna start up here. I'll start up here at X
equals 20 centimeters. If we put that in meters,
technically SI units, you should have meters
for the default units, so this would be point two. Zero point two meters, and
that's also the amplitude. So remember, this is the amplitude. So this distance here is the amplitude. Then what does the mass do? Well it shoots back toward equilibrium, that's X equals zero.
And then it oscillates. It goes through that point and comes back, so essentially what
you're gonna have on here goes toward equilibrium,
so it looks like this, goes toward equilibrium, BOOM! Hits equilibrium. And that's
when it's at X equals zero. Passing through this point right here. Then it's gonna come back down, so eventually is gonna
compress the spring and stop. That's when you're way over
here and you've then stopped. The mass has been stopped by this spring. And it's gonna come back up and this process is gonna repeat, it's gonna go back through
the equilibrium position and come back up. Which by up it means over here
back to this initial point. That's one whole cycle. Look it, that has gone
through a whole cycle. I kinda made this a little too high. Let me make that a little better. It should never go any
higher that it started here. So it's gonna look something like that. Come back down and this
whole process repeats over and over and over. And If I was drawing this perfectly, it'd be perfectly smooth, but hopefully you get the idea. And this is great! 'cause
now we can draw the variables we talked about earlier like amplitude, because amplitude is the maximum
magnitude of displacement from equilibrium. That would equal point two meters. That's what we represented
on this graph here. And we can also represent the period. Remember, the period was the time it takes to go through an entire cycle. So if our mass started here, to go through an entire cycle, it better get back to that
point and have reset completely, so that would be to here. So on this graph, this is the period. So the time it took to do
that is one whole period. That would be the period T, which if we recall what we said earlier, we said that the period was six seconds. So if it really is six seconds, we can say that this here would be, if we count this is time T equals zero, this would be six seconds,
this would be three seconds, that would be half of the
period, or half of the cycle. This would be nine seconds,
this would be 12 seconds, which would be two whole periods. And in a sense, it has gone
through two whole cycles once it gets back to that point. Now notice, you didn't
have to measure the period from peak to peak. You could have measured it from, sometimes people call
these troughs or valleys, so you can measure it trough to trough, or valley to valley, took three seconds to nine seconds. That's a time of six seconds. It took six seconds to
go from three seconds to nine seconds. That's still one whole period. Or you can go from this point here, I guess this would be like
seven point five seconds all the way to what is this, 13.5 seconds? That would also be one whole period. Just make sure you don't do this: Sometimes people are
like: oh, a period, eh? Repeat a whole cycle, eh? Alright I'm gonna go from
this equilibrium position back to that equilibrium position. That's not a whole cycle. Look at it. This point the mass is going that way, and this point the mass is going that way. So you can't start your clock when the mass is going that way. Stop it when the mass
is going the other way and see if you have gone
through a whole cycle. Because that hasn't fully reset. If you're gonna fully reset, you gotta go from mass heading to the left through equilibrium, all the way back to
mass heading to the left through equilibrium. So you would have to go
from this equilibrium point, all the way to that equilibrium point to have a full cycle. A cycle would look like this
whole process right there. So recapping: the amplitude of
a simple harmonic oscillator is the maximum magnitude of displacement from the equilibrium position. You can measure it that way or
you can measure it this way, you would get the same amount. And the period is the time
it takes for an oscillator to complete one entire cycle, which you can find on a graph by measuring the time it takes to go from peak to peak, from valley to valley, or from equilibrium position,
skip an equilibrium position, and then get to the next
equilibrium position.