Class 11 Physics (India)
- Production of sound
- Sound Properties: Amplitude, period, frequency, wavelength
- Speed of Sound
- Relative speed of sound in solids, liquids, and gases
- Decibel Scale
- Why do sounds get softer?
- Ultrasound medical imaging
- Standing waves in open tubes
- Standing waves in closed tubes
- Wavelength and frequency for sound waves in tubes
- Pressure and displacement of sound waves in tubes
- Introduction to sound review
Why do sounds get softer?
Let's think about why sounds would have to get softer as you get further from the source. Created by David SantoPietro.
Want to join the conversation?
- can we make useful energy out of sound energy
example-can we make a fan run or like produce electricity whenever anybody talks or shout or sings or emits sound waves.(23 votes)
- The reply from verbam is not really correct as far as the question pertaining to the practical production of electrical energy through acoustical energy. The kinetic energy from the pressure fluctuation of a sound is mechanically transferred through the ear drum into the middle ear, and through the bones of the middle ear into the inner ear where another mechanical process releases potassium which is ultimately where the mechanical to electrical transduction begins. My point is that the energy that the auditory nerves run on isn't created from the acoustical energy transmitted to the inner ear but comes from the same positive and negatively charges salts that the rest of our nervous system runs on.
That being said the answer to the original question from Ashely John is technically yes, but practically no. Sound produced from humans are very low level pressure fluctuations. So low that no mechanical force could be harnessed from them, and nothing produces sounds that have a high enough pressure to produce mechanical force that aren't utterly destructive and/or unpredictable, think atomic bomb or volcanic explosion. Additionally, there is heat energy produced from the acoustical energy made by humans, but it is also a very small amount. I am not sure the source, so I don't know how accurate it is, but I have been told that theoretically it would take close to an entire professional football or soccer stadium (approx 75 - 90,000+ people) yelling at full throat to produce enough heat to warm a cup of coffee. So as I said, the answer to your question, is technically yes, but practically no.(33 votes)
- I notice that when I raise the frequency from sub sub contra octave to 7th octave that the number of decibels starts low(related to the fact that it is a very low note). It gets louder and louder as I reach the Great Octave where it is the loudest of all low notes. It then gets quieter and quieter as I continue up to the 5th octave. It then gets louder again as it reaches the 7th octave.
Now I know that this is not related to distance since I tested it all at the exact same distance from the source. It also isn't related to computer volume since even that certain percentage fluctuates but I notice it being constant for any particular note. If I do it on the piano it isn't related to how hard I press the keys since I usually do that with the same amount of force(Mezzo Forte usually).
So if it isn't related to any of these things then why is it that it gets louder as I approach C2(C in the Great Octave), quieter as I approach C8(C in the 5th octave), and then louder again as I approach C10(C in the 7th octave)?(11 votes)
- Great observation! That's because your ear is better adapted to hearing sounds that are relevant to your survival and function. So some parts of the cochlea, especially those relevant to speech perception, are more receptor rich.(7 votes)
- if the amplitude is made to increase , will the frequency be increased(3 votes)
- Amplitude can be increased or decreased without changing the frequency.(6 votes)
- If air particles are constantly vibrating then why can't we hear them?(3 votes)
- They vibrate at a very low frequency which is inaudible to human ears however if you happen to be in the middle of a storm you could possibly hear it.(4 votes)
- how does sound fade away?(3 votes)
- As a sound wave goes farther from its source it spreads out, and thus fades away.(4 votes)
- Does light also experience attenuation, since it doesn't need a medium to travel?
But we notice that car lights look dimmer as the car moves far away.(3 votes)
- Interesting point: there are two different processes to consider.
Light will have a reduced amplitude / intensity due to distance and this falls off as by 1/r>2 but is this attenuation?
I would have thought attenuation is more to do with loss of energy due to 'damping' or other energy exchange processes; for example, as light travels through an optical fibre... it loses energy to the glass;
Seems like these are quite different... would you still call both 'attenuation'??(3 votes)
- If you look at the part of the video around4:00, the intensity of the sound wave is "spread out over a large area." However, it is a little illogical for the sound to spread out. Why does the area increase as distance increases? Why does the original source of sound have to be spherically shaped? Why not cubed or something else?(2 votes)
- When you clap your hands together, doesn't the noise go out in all directions, and doesn't it travel at the same speed in all directions? Someone 100 meters to your left will here it at the same time as someone 100 meters to your right, and the same as someone 100 meters above you. That makes a sphere shape.(4 votes)
- how is it possible to direct the sound waves only in one direction?(2 votes)
- if intensity is a quantity that measures how loud something is, and amplitude is the same, then is amplitude intensity?(1 vote)
- No. Amplitude is the size of the wave. Intensity is the energy contained in the wave. Intensity is proportional to the square of amplitude.(4 votes)
- how is the energy lost to the air molecules, isn't the supposed to be a disturbance of air that travels through space?(2 votes)
- Some of the energy is left behind as the wave front passes, in the form of extra thermal energy (increasing the temperature of the air).(1 vote)
- [Voiceover] You are straight up partying at the rock show here. But you're a little close to the speakers, it's getting a little loud. You need a break here, your ears are starting to hurt. So you back up and my question is, it sounds like a stupid question, but I don't think it is, why does the sound seem softer, when you're further away from a speaker compared to when you're close to a speaker. And be careful, there's actually two distinct reasons for this, so let's make sure we're clear about this. It's not so dumb of a question. Here's a speaker. Now, this speaker is going to emanate sound waves out away from it. And I'm gonna represent that sound wave like this. Let's draw a circle around it, here's the sound wave. To make things simple, let's just say it sends out one burst of a sound, it's not sending out repeated sound waves, let's just say there's one burst of the sound. This is what the sound wave looks like at a given moment, the wave front. And if you wait a little while, that wave front's gonna emanate outward. So, here's the sound wave after some later amount of time. Here's the sound wave, if you wait a little longer. And if you wait a little longer, the sound wave might look like this. These are all the same sound wave, these are just at different moments in time. So, the question was, to remind you, if someone's over here, close to the speaker, why do they notice the sound that's louder from a person over here farther from the speaker. And one reason has to do with what's called intensity. The intensity is defined to be the power per area. So, this sound this speaker is sending out, a certain amount of power, and that's divided by a certain amount of area. So, right here that power is divided by this much area, that power is spread out over this much area. But the sound wave's gonna emanate outwards. And that means this power is gonna get spread out over a larger and larger area. So, now that same amount of power is spread out over a larger area. And this keeps going, the further away the sound wave gets, the larger the area. So if you're way back here, now that same amount of power is spread over a much larger area. And this is one reason why the sound's gonna get weaker, 'cause if you divide by a larger area, if you take that same amount of power, you divide by a larger area, that intensity is gonna get smaller. Notice, your ear doesn't sample the whole wave, your ear just samples the part that actually gets into your ear. If your ear could hear the whole wave, if you could sample that whole amount of power, yeah, maybe that would sound just as loud. But you only get a piece of it. So, you're just measuring how concentrated that sound is, not the total amount of sound that is on the whole surface. So, how much less is it gonna be? If someone's standing twice as far away, if this person is at a distance D from the speaker, and some other person is at a distance two times D from the speaker, twice as far. For this person up here, if this person here is an intensity I, what intensity will this person over here experience? Will they hear half I, fourth of an I, an eighth of an I? To figure it out, you've gotta remember that these sound waves are emanating in 3D space, these are 3D sound waves. So, these are really spheres, these are spheres of surface area that the sound wave's emanating out along, and so, gotta remember what the area of a sphere is. I remember the area of the sphere; it's four pi r squared. This means the intensity is gonna equal the power divided by four pi r squared. This means, if this person is twice as far away, he's twice the radius away, that means the area that the power's been spread out over is now not just twice as much area, this is r squared. Since this is r squared, if you double the radius, you're getting four times the area. This is, actually, the power over here spread out over four times the area. Since the same amount of power's spread out over four times the area, this intensity is gonna be 1/4 as much. If the same power's spread out over four times the area, and if you were three times further away, over here, what do you think the intensity would be out here? The intensity, since you've got three times the radius, you square that three, you're gonna get a factor of nine. This is gonna be 1/9, the intensity out here. This is an important rule: the intensity is gonna be proportional to one over r squared. Lots of things in physics are proportional to one over r squared, and intensity is gonna be one of them of the sound wave, 'cause it's spread out over a sphere. And that sphere gets bigger, like r squared. This is actually a little bit of a simplification, but this is one reason why the sound waves get softer the further out you go, because that sound, that power is now spread out over a larger area. It's an oversimplification, because, let me show you why. It's an oversimplification, because, if you had an actual speaker, an actual speaker is probably not gonna be sending out perfectly spherical sound waves. Oops. I mean, you wouldn't really want it. If you're gonna manufacture a speaker, you probably don't want the sound wave traveling back here just as much as it travels in front of you. You want the sound to go in front of the speaker. But it doesn't even matter. Even though it might not be a perfect sphere, if it's gonna be part of a sphere, it's still gonna emanate along part of the sphere. This is still gonna be in 3D. These are gonna be 3D sound waves. So, even if the area isn't spread out over exactly four pi r squared, maybe this is only a third of a sphere, maybe only an eighth of a sphere, a sixteenth of the sphere, it doesn't actually matter. What matters is you're still gonna have r squared here. And because you're gonna have r squared, that intensity of the sound wave is still going to be power divided by something with r squared. So, the intensity is gonna be proportional to one over r squared. It's gonna die out like one over r squared. Let's come back here, oops, let's come back to this one. That's one reason why. One reason why the sound gets weaker, that power is distributed over a larger area. There's another reason why. The other reason why is that... I lied again a little bit. This power gets diluted over a larger area, but this power, some of that energy doesn't even make it over to the second person. Some of that power gets lost, some of that energy gets lost into the air here. I don't really like that term, it doesn't really get lost, we know where it is. But energy is lost, and by "lost" we mean it gets turned into E thermal. Thermal energy of the air molecules in here. It's not really lost, it's more like it's just unavailable. It's just stuck in the random thermal vibrations of the air molecules. I'm not talking about the actual coordinated oscillations back and forth of the air molecules as sound passes through them. I'm talking about just random vibrations in random directions of the air molecules. This takes energy away. So, this is one more reason why this person farther away will hear a softer sound. Not only does that energy get spread out over a larger area, some of this energy gets lost. This has a specific name, this is called attenuation. Attenuation is referring to the fact that some energy gets lost to the medium itself. So, whenever energy gets lost to the medium, through which a wave is traveling, we call it attenuation. These are the two independent reasons why the sounds will sound softer. One, that power's spread out over a larger area. And two, some of the power doesn't even actually make it to where you're at, because it gets lost due to attenuation in the medium itself.