Class 12 Physics (India)
Let's explore the scattering of light with the help of an experiment. When we shine a laser through a glass of water with few drops of milk, we can see the path of light. This effect is often called the Tyndall effect. Created by Mahesh Shenoy.
Want to join the conversation?
- At4:50if we add more sugar to the solution to make the particles denser, will they scatter more light significantly??(5 votes)
- I mean, I may be wrong, but I think adding mroe sugar to the solution won't really affect the density of the particles. The size of the particles remains same. The behaviour of the particle with light rays also remains the same.(1 vote)
- Milk contains white coloured particles in which *red in dominant over white.* What if we take a solution containing black coloured particles in which *black is dominant over red. Will it show the laser beam??*(4 votes)
- I'm not very sure, but maybe the black particles will make the solution less transparent and more opaque. So, technically, it shouldn't show the beam of light.
Nice question, by the way.(3 votes)
- How does the light pass through the milk molecule? How it is scatter light in all directions??(4 votes)
- The light does not pass through the milk molecule. The light bounces of the milk molecule as the molecules are pretty big in size, and so the light scatters.(1 vote)
- Can we keep the dust particles on the surface of water using the property of surface tension and then use the phenomenon of scattering of light?(3 votes)
- shouldn't the light that is scattered hit other particles that are near by and the latter get scattered as well and hit other particles until the glass light up not only the trajectory of the light beam?(3 votes)
- How light that is not scattered from an atom transmit further ? does it absorbed from atom and then reemmited in the same direction ?(3 votes)
- Is the light dependent on time or time dependent on light. Any one these should be true right?(2 votes)
- Light is something that exists in nature...Time is a Hypothetical aspect made by Scientific humans to make Physics calculations easier... So its upto you to percieve(1 vote)
- What substances other than milk can be used to demonstrate the Tyndall Effect?(1 vote)
- You can observe this effect in any colloid. For example, whipped cream, gelatin, muddy water, mayonnaise, etc.(2 votes)
- Check out this cool experiment. I'm shining my laser light through two glasses of distilled water. To this glass, I've already added some sugar and stirred it very nicely so it's dissolved. To this glass I have not added anything. Notice that we don't see the beam or the path of light in either of the glasses. But now, we'll go ahead and add some milk to the second glass, and notice what happens. As we stir that milk, we can now see the path of light. So, the question is, why do we see the path of light when we add milk, but we don't see it when we add sugar to it? So the reason we get to see the path of light in this milk water mixture is due to a phenomenon called scattering of light. So scattering of light. So let's see what happens. When we add milk over here, the milk particles get completely dispersed throughout the medium. They distribute themselves throughout water. And now when light enters into this mixture, it hits one of these particles, so let's draw that over here. So here's our light, let's say this is light from the laser. It enters into this mixture and hits one of these milk particles. So here's one of the milk particles. What happens after this is the milk particle reflects this light in all the directions. So it reflects light in all the directions. And the important thing to note over here is earlier we have seen that big objects, like mirrors or a ball or any big object if you take, they will reflect light in a specific direction. But turns out that when you get to these really tiny particles they will always reflect light in all the directions. And if you're wondering why this happens, then it turns out we need to really dig into this deeper and figure out how light interacts with matter and everything, which we'll not do. Which we'll not do. So, we'll just accept that tiny particles this is a property of tiny particles: they will always reflect light in all directions. It's just that when these tiny particles get together to form a large object, like the mirror or any other day-to-day life object that we encounter, then they only tend to reflect light in a specific direction. Okay, so this phenomenon of reflecting light in all directions is what we call the scattering of light. And because of this, some of the light is also reflected towards us. We are somewhere over here, (mumbles) I can't draw that over here, we are somewhere over here right? That's where the camera is. So some of the light gets reflected towards us, or into the camera, and as a result that particle, we see that particle glowing red in color. It glows red because it's reflecting red. And therefore that particle which it hit over here, that particular particle glows red. And then of course not all the light gets reflected. Some of the light goes through as well, actually most of the light goes through. Let's draw that. So most of the light goes through. This is the light that didn't get scattered. Got that? This is the scattered light, and this is the light that didn't get scattered. So, most of the light goes through and then it hits another particle and then again scatters off from that. So another particle over here will glow, and the same process continues and as a result, all the particles which are in the path of that light end up glowing. And since these particles are really really tiny, of course, I've drawn them to be pretty big over here, but they are really really tiny and there are so many of them that when we look at it, we don't get to see the individual particles, but all we see is a straight line. So we see a line that is glowing. And that line is what we perceive as the beam of light. That's that beam that we're seeing. So what we're actually seeing are the milk particles who are scattering light and as a result they are glowing. And that's what shows the path of light. But why don't we see the path of light in a sugar solution? Don't they scatter light? Well, they too scatter light, in fact all particles can too scatter light, but here's the thing. It turns out that if we do the analysis, it turns out that the amount of light that they scatter depends on the size of the particle. As the particle size become bigger and bigger, they tend to scatter more and more light. If the particle size becomes too small, then they do scatter light, but the scattered light will be so insignificant that we won't be able to see it. So a considerable amount of light will not reach our camera. And that's what's happening over here. The particles in the sugar solution are so tiny that the scattered light is negligible, and that's why we can't see it. And in fact, analysis shows that if the particle size is roughly if the size of the particle is roughly smaller than one nanometer. Right, this is not an exact value, it's a rough value. If particle size get any smaller than a nanometer, then the scattering effect is so tiny that when you shine light through it, you won't be able to see anything. And that's what happens in any solution. So you take sugar solution or you take salt solution, whenever something dissolves, those particles usually tend to be smaller than a nanometer, and that's why we don't see the path of light. But milk particles are way bigger than a nanometer. They could be about, I don't know, maybe, I don't know the exact value but maybe around 60, 70, to 100 nanometers in size. On the other hand, if the particles become too large, so let's say we have particles which are too large, and again a rough value would be, let's say they are larger than about 1000 nanometers. If they get too big then also we have a problem. Their problem is not with scattering. These particles can scatter light even more strongly because they are big particles. And, by the way an example of this would be dust particles, and you may have seen that sometimes when it's dusty and you're outside, it's nighttime, and there are vehicles with their headlights, you can see the beam of the headlight, right? That's an example of scattering of light by big particles, like dust particles. So they don't have a problem with scattering light. But their problem is since they are too big, they tend to usually settle down due to gravity. So, if you were to add dust to water, which we will do in a minute, we'll look at that in a minute, then, even if you stir it very nicely, those dust particles will not stay long in the water through the bulk of the water. They will usually tend to settle down. And once they settle down, then most of the particles won't be in the path of light. And that's the reason they won't scatter light. So the ideal case for us to see a path of light would be to have particles whose size is somewhere in between this. So if we have particles which are not too small, their size is larger than a nanometer, but that aren't too big so that they would settle down. They're smaller than, let's say about 1000 nanometer and by the way remember these are rough values, okay? Then, we will get to see the path of light. And such mixtures are called colloids. So, okay, it's a little hard to see, so let me write that down over here. So it's called colloids, and you may have already studied about colloids in chemistry, the same colloids we are talking about. So colloids are the best example to see the path of light. These are called as solutions. Solutions are one of the worst to see the path of light because the particles are very tiny. Sugar solutions, salt solutions are examples of this. And these are called suspensions. They too scatter light very strongly, but the problem is they tend to settle down, and usually not be found in the path of light. So if we go back to our experiment where the sugar solution is not showing us the path of light, if we look at it carefully, you can sort of see the beam, isn't it? Now this is not due to the sugar solution, don't worry. If we zoom in carefully, we can actually find the particles just scattering light. You can see there are some dust particles that got also added when I added the sugar, and some impurities. These are the particles which are larger than the 1000 nanometer size, so that is causing a suspension. So the scattering that we're seeing over here is due to the suspended impurities. And by the way, look at this dust particle which you can see over here. That is so large we can even see it with our eyes directly. And as it swirls and comes into the path of light, notice how strongly is scatters light, okay? Just concentrate on this particle. Let's go back a little bit, just concentrate on that particle, here it is, look at that. Look at that. Do you see it? See how strongly it scatters light. So, big particles can scatter light no problem. But their problem is that they tend to settle down, so most of those particles will not be found in the path of the light. And as a result, their path is not so strong. It's nothing compared to what we see in colloids. So colloids are the ideal place to see this effect. So that's pretty much it. One last detail is whenever we have scattering of light due to colloidal particles, due to colloids, we often call that as the Tyndall Effect. So scattering of light due to colloids is called Tyndall Scattering, or Tyndall Effect, because this guy, John Tyndall, did a lot of work on this subject. And this also has a great application. Tomorrow if we have any mixture, and we want to know whether it's a colloid or not, we will just shine light through it. If we can see the path of light, that's Tyndall Effect, then it's a colloid.