Analog information can be digitized and stored reliably in computer memory. This way it can be sent over long distances as a series of wave pulses. Learn about the differences between digital and analog information and how digital information is created. Created by Khan Academy.
Want to join the conversation?
- Is this why when you hear a recording of someone's voice, etc. it doesn't sound quite the same as if it were to be in real life?(10 votes)
- Yes! Especially if the recording is on a low quality (or old) recording device, which are not as capable of capturing the waves as precisely.
Although, if you have a really good platform, it can become hard to differentiate the two.(17 votes)
- how is the information lost in translation?(4 votes)
- Compare the set of real numbers with let's say the set of integers. If we are talking about numbers one and two in these sets we are still talking about 1 and 2 but in R there are infinite numbers between 1 and 2 which are lost in Z... so some information is lost in translation.(8 votes)
- Can you turn digital wave into an analog wave, or is it a one-way process?(4 votes)
- Digital to analog conversions can be performed using resistor networks, and the conversion to an analog signal is usually in the order of nanoseconds. Since the digital information is a step approximation of the input signal, the resulting output from a D to A converter reflects this step nature of the signal. So no, it isn't a one-way process.
I hope that helps!(6 votes)
- Does an Analog clock really have infinite values? It only goes from 12 AM - 12 PM(5 votes)
- Yes, it does. The hours and minute hands can position themselves in an infinite amount of fractional locations (e.g.3:01.001,3:01.002,3:01.003, etc).(2 votes)
- How can I tell the difference between an anologe and digital(4 votes)
- An analog clock is a clock with the hands that turn around in a circle. A digital clock is a clock that just tells you the time by stating the numbers.(4 votes)
- The Analog can tell the time and the Digital can tell the time too?(4 votes)
- can u turn waves into digital or is it a one way thing(1 vote)
- You can turn analog signals (waves) into digital signals and vice versa!
An example of this is a microphone + speaker setup where the microphone picks up sound waves (analog signals) and turn it into digital signals. Then the speaker turns the digital signals into analog ones.(7 votes)
- How can I tell the difference between an anologe and digital(3 votes)
- An analog clock will display the fractional seconds between every five seconds. A digital clock will only show the minutes and not the fractional seconds.
I hope that helps!(2 votes)
- why was the first one so lazy and the second one was so kind of lazy but not to much but why is the third one is like a rectangles.(3 votes)
- [Instructor] In this video, we're going to talk about analog versus digital. Something that's analog can be any value within a given range while something digital is represented by a number of discreet or separate levels. To distinguish these two ideas, I like to think about clocks. An analog clock has the numbers in the hands and it's analog because the motion of those hands is continuous. They can sweep across the circle representing any of infinite times on that clock. For example, between 3:06 and 3:07, the minute hand is actually going to be at some point between those marks on the clock showing one of the infinitely possible times that the clock can represent. Compare that to a digital clock. A digital clock is only going to show you 3:06 or 3:07. It will never display any of the many fractional seconds between those two times. Digital only takes on certain discrete values and it has a finite number of those values. So an analog wave or signal will smoothly sweep across the infinitely many possible values it has while a digital wave or signal will only be at one of a number of discrete values. So the shape of the wave will be more square or step like. Let's check out an example so this makes a little more sense. I like music. So we're gonna talk about sound. Sound is an analog signal or wave. So if we look at a graph of sound, volume over time, it's going to have a smooth continuous analog wave form, both the amplitude or the volume, and the frequency, what we hear as pitch are changing continuously between infinite possible values. All right, and that's because sound waves, the vibration of particles propagating through the air actually changes continuously. The very first sound recording and reproduction technology imprinted that analog wave directly onto a material. For example, records imprint that sound wave into vinyl and cassettes imprint the sound wave onto tape. A major drawback of this technology is after the sound to play back exactly as it was recorded, that wave form needs to stay untouched, right? So think about scratching vinyl or smudging a cassette tape, that's directly deforming the wave. So you'll never be able to reproduce the sound exactly as it was recorded. So, technology advanced and sound waves became digitized. Here's how. All right, so recall our analog sound wave. We have a smooth analog wave that's taking on any number of infinitely possible values within this range. In order to digitize this wave, we're going to ascribe numbers to the amplitude at different points, all right? Watch this magic. So we go over here and make a scale. So we're breaking up the amplitudes into discrete possibilities. Then we can go through the wave and at specific points of the wave measure what is the amplitude based on that scale. So over here, we're at the first point of the scale. At this peak, we're at the second point of our scale. Then the first, the third, the second, the fourth, back down to the first. Now that we have this way broken up into levels, right? We can ascribe the numbers and we effectively turn this analog wave into a set of numbers, one, two, one, three, two, four, one. Our wave has been digitized. Now that digitize wave can be played back through a speaker to recreate the analog wave. As long as the sampling happens at a quick enough rate, humans can't tell the difference. All right, so the digitization of waves is all about ascribing specific numbers to some of those mechanical properties of the wave. The important thing here is that now that the wave has been digitized, the digitized sound wave can be reliably stored, processed, and communicated with computers. So some information is lost in translation, but once the wave is digitized, it's quality will never degrade, okay? And that allows for a lot more reliable technology because the wave is represented with numbers instead of it being physically imprinted on some material. So humans prefer to store information like sound digitally, and there are ways to turn analog signals, which can represent any of infinite possible values into digital information, which is useful because information is stored only at a number of discreet or separate levels.