Nucleophilicity (Nucleophile Strength). Created by Sal Khan.
Want to join the conversation?
- Can aprotic solvents be non-polar as well as polar? Will the Sn1 and Sn2 reactions still work?(15 votes)
- Depends on what you mean, there are definitely nonpolar aprotic solvents because they contain no hydrogen bonding moeties: O-H, S-H (rarely), N-H, or H-F
However, nonpolar solvents in general will not help the Sn1 and Sn2 reaction since the transition state for both pathways are polar. Using a nonpolar solvent will interact with the reactants more favorably than the transition state structure because it is less polar (like goes with like) and that will lower the energy of the reactants, effectively increasing the activation barrier for the reaction.(3 votes)
- How does F(-) become the best nucleophile in aprotic solvents and I(-) the worst? What I mean to ask is how and why exactly is the order of nucleophilicity flipped in aprotic solvents?(9 votes)
- In aprotic solvents, there are no protons to block or "solvate" the nucleophile. As a result, the anion that has more electron density is more nucleophilic. Since fluorine is more electronegative than iodine, the fluoride anion is more electron dense than iodide. In aprotic solvents, nucleophilicity correlates to basicity.(12 votes)
- how to indentify whether the reaction is SN1 or SN2???(5 votes)
- SN1 has a substrate being changed into a carbocation, and then a nucleophile attacking it. These must occur via 2 steps. SN2 has only 1 step with the Nucleophile "attacking" the Substrate and the Leaving Group detaching from the Substrate to allow room for the Nucleophile to replace it.(13 votes)
- why don't all these terms come in inorganic reactions?I mean nucleophilicity,eletrophilicity and stuffs.....(5 votes)
- At the part when Sal mentions that Iodine is a bigger ion, and it is polarizable: can someone clarify for me why the Iodine would very much prefer to make a bond with another partial positive species (in the video, it is methylbromide) rather than the hydrogen bond?(3 votes)
- The iodide ion has a negative charge, so it is attracted to the partial positive charge on the methyl carbon. It is a strong nucleophile because of its polarizability. HI is a strong acid, so iodide ion is a very weak base. It has no tendency to attack a proton on an OH group(4 votes)
- I don't get this. If nucleophilicity means to 'give away' electrons then F ion will not be a good nucleophile because it is the most electronegative element and it loves electrons. Why would it 'give away' its electrons? On the other hand, the alkali metals would be the best nucleophiles since they want to give their electrons. This definition doesn't make any sense. Someone clarify please.(4 votes)
- what is meant by hard nucleophile and soft nucleophile? please tell me(2 votes)
- Hard nucleophiles are small, have high charge densities, and are weakly polarizable.
Examples are ROH, RO⁻, RNH₂, NH₂⁻, and F⁻
Their orbitals do not necessarily overlap very well with the electrophile's accepting orbital, but the electrostatic attraction directs them and aids the reaction.
Similarly, examples of hard electrophiles are H⁺, Li⁺, Na⁺, and Mg²⁺.
Soft nucleophiles usually have large, polarizable orbitals with low charge densities.
Examples are RSH, RS⁻, R₃P, I⁻, and CN⁻.
Their orbitals easily overlap for nucleophilic interaction with the electrophile's accepting orbital.
Examples of soft electrophiles are C-X, Br₂, and I₂.
Electrophile/nucleophile reactions are better when matched in hardness.
The C-X bond is soft so a soft nucleophile like CN⁻ will attack the carbon (substitution) but a hard nucleophile like RO⁻ will tend to attack an H atom (elimination).(5 votes)
- So generally an ion is more nucleophilic when the negative charge on it is less stable? Is it correct?(3 votes)
- Is water an alcohol?5:06(2 votes)
- While this is true, it really isn't an observation of any value. An alcohol is an organic compound and water is hardly an organic compound, even though it is a building block of life.
We always write an alcohol as R-OH and for (I hope) obvious reasons, R is a group containing carbon.(3 votes)
What I want to do with this video is talk about nucleophilicity. This is really just how good of a nucleophile something is. Or I'll just make up a definition right now: the ability for an atom slash ion slash molecule to act as a nucleophile, or to give away extra electrons and bond with a nucleus or with something else. I'll say with a nucleus. I want to say with a nucleus, because that's what nucleophilicity is saying. It loves nucleuses, especially positive ones, that it can give its extra electrons to it. Now, as a first cut, if you want to identify a good nucleophile, it should have extra electrons to give away. The best things that have extra electrons to give away are negative ions or anions, so just at a very high level, something like the fluoride anion. Normally, fluorine has seven valence electrons: one, two, three, four, five, six, seven, but it's so electronegative, it might be able swipe off another electron from something else and then it becomes the fluoride anion. Then it becomes the fluoride anion with a negative charge. You can do that for all of the halides. You could do that for chlorine. It can become chloride. Bromine can be bromide. Iodine could be iodide. Let me do iodine, too. Iodine, once again, it's a halide. It has seven valence electrons. It has many, many more electrons than fluorine, but if you just look at its valence shell, it has seven electrons. And then it is also reasonably electronegative, not as electronegative as fluorine. Remember, the trend goes like this from the bottom left to the top right. So fluorine is extremely electronegative, but iodine is still pretty electronegative. It is a halogen so it also might be able to swipe off an electron from someone else and become iodide. In general, things with extra electrons, lone pairs of electrons, and especially a negative charge, are going to be pretty good nucleophiles. Another example that's not a halide is the hydroxide anion, so OH. This is an example of something that is a molecule. Maybe traditionally water would look like this. Traditionally, this is just neutral water, and oxygen has two lone pairs like that, but oxygen is pretty electronegative. It is already kind of taking the electrons away from one of the hydrogens, and at some point, it might just take it altogether and then you have the hydroxide anion. This would look like this. You have your original two lone pairs, just like that, and then you have this pair that's going to be taken. It already had that electron. It takes that electron from the hydrogen, so now it has two more electrons. Let me color code it so you see what it took. It took this electron from the hydrogen and now this also has a negative charge. That's also a reasonably good nucleophile. And, of course, you have your hydrogen now. It lost its one electron. It only has a proton in its nucleus. Whenever you see H plus, this is really just a proton. There's nothing else to that hydrogen. So that's hydroxide. These are all reasonably good nucleophiles in that they have something to give away. They have extra charge. Now, what I want to do is think about between these, how do you think about what's going to be a stronger or weaker nucleophile? And here, it becomes a little bit more nuanced. What we're going to do is differentiate what happens in a protic solvent versus what happens in an aprotic solvent. Let me write down. Let me start with a protic solvent. I'll make two columns here, protic solvent and then we'll do aprotic solvent right over here. Once again, these are fancy words, but they mean something pretty simple. Protic solvent is something that has hydrogens that can be taken away or might have free protons floating around. An example of a protic solvent is water or really any alcohol. Water is the simplest example or maybe the most common. The reason why you might have protons floating around is exactly this reaction I showed right here. Maybe every now and then a hydroxide anion forms. Even more likely, maybe a water takes a hydrogen from one of the other waters. One of the water molecules takes hydrogen from one of the other water molecules and becomes a hydronium, where it's not a proton necessarily, but it's an oxygen. Let's say if you start with water and one of these electrons were to be given to some proton floating around, it would look like this. And it has a positive charge and then this proton is very available. You can almost imagine it's almost floating around because that oxygen really wants to take back that electron. So protic solvent is water. In water, you might see a little bit of hydroxide, a little bit of proton, a little bit a hydronium. You see all of it in there, but the bottom line is that there are protons that can react with other things. Let me clear this away so that I have some real estate. Let me just write down water. Water is a protic solvent. Now, wait. Is that always the case? It seems like hydrogens are everywhere. Well, no, it's not always the case. Let me show you an aprotic solvent. Diethyl ether looks like this. And just so you know the naming, it's an ether because it has oxygen, and it's diethyl because it has two ethyl groups. That's one ethyl group right there and that is the second. So it's diethyl ether. Now, you might say, hey, this guy's got hydrogens lying around as well. Maybe those can get released. But, no, these hydrogens are bonded to the carbon and carbon is not anywhere near as electronegative as oxygen. Carbon is unlikely to steal these hydrogens' electrons and these hydrogens to be loose. If they were bonded to the oxygen, that would have been a possibility. With water, you have obviously H-O-H. In alcohols, you have some maybe carbon chain bonded to an oxygen, which is then bonded to a hydrogen. So in either of these cases, in either water or alcohol, you have these hydrogens where the electron might be taken by the oxygen because it's so electronegative and then the hydrogen floats around. Anyway, that's a review of protic versus aprotic. In a protic solvent-- and this is actually a general rule of thumb-- if a nucleophile is likely to react with its solvent, it will be bad at being a nucleophile. Think about it. If it's reacting with the solvent, it's not going to be able to do this. It's not going to be able to give its electrons away to what it needs to give it away, to maybe what we saw in an Sn2-type reaction. In a protic solvent, what happens is that the things that are really electronegative and really small, like a fluoride anion-- let me draw a fluoride anion. In a protic solvent, what's going to happen is it's going to be blocked by hydrogen bonds. It's very negative, right? It has a negative charge. And it's also tightly packed. As you can see right here, its electrons are very close, tied in. It's a much smaller atom or ion, in this case. If we looked at iodide, iodide has 53 electrons, many orbitals. Actually, iodide would have 54. It would have the same as iodine plus one. Fluoride will have 10 electrons, nine from fluorine plus it gains another one, so it's a much smaller atom. So when you have water hanging around it, let's say you have something like water. That has a negative charge. Water is polar. Actually, both of these are polar, so I should write down polar for both of these. This is a polar protic solvent. This is a polar aprotic solvent. In this case, water is still more electronegative than the carbon, so it still has a partial negative charge. These parts still have a partial negative. Water still has a partial negative charge. The hydrogen has a partial positive charge so it is going to be attracted to the fluorine. This is going to happen all around the fluorine. And if these waters are attracted to the fluorine in kind of forming a tight shell around it, it makes it hard for fluorine to react. So it's a worse nucleophile than, say, iodide or hydroxide in a polar protic solvent. Hydroxide has the same issue. It's still forming hydrogen bonds, but if you wanted to compare them, iodide is much bigger. Maybe I'll draw it like this. I'll draw its valence shell like this. It's a much bigger ion. It has all these electrons in here. And so, it still will form hydrogen bonds with the water. It still will form hydrogen bonds with the hydrogen end of the water because they're partially positive, but it's going to be less tightly packed. And on top of that, iodide is more polarizable, which means that its electron cloud is so big and the valence electrons are so far away from the nucleus that they can be influenced by things and then be more likely to react. So let's say this iodide is getting close to a carbon that has a partial positive charge. So let's say carbon is attached to a bromine and then it's attached to three hydrogens. We've seen that this will have a partial negative charge. It's more electronegative than the carbon, which will have a partial positive charge. When this guy, this big guy with the electrons really far away, gets close to this, more of the electron cloud is going to be attracted to the partial positive charge. It'll get distorted a little bit and so it is more likely to react in a polar protic solvent. Fluoride, on the other hand, is very tightly packed, blocked by the hydrogen bonds. It's less likely to react. If you were to look at the Periodic Table, if you look at just the halogens in a polar protic solvent, the halides-- this would be the ion version of the halogens-- the halide's iodide will be the best nucleophile. Fluoride will be the worst. So in a polar protic solvent-- let me write this down-- we have a situation where the iodide is the best nucleophile, followed by bromide, followed by chloride, and then last of all is the fluoride. The exact opposite is true in an aprotic solvent. In an aprotic solvent, the fluoride, which is-- fluorine is far more electronegative. Fluoride is more basic. It will be more stable if it is able to form a bond with something than iodide. Iodide is pretty stable. If you look at a hydrogen iodide, it's actually a highly acidic molecule. So iodide itself, the conjugate base of hydrogen iodide, is going to be a very bad base. When you're dealing with an aprotic solvent, you go in the direction of basicity. We're going to learn in the next video that actually basicity and nucleophilicity are related, but they aren't the same concept. We're going to talk about that in a little bit. If you're in an aprotic solvent, you're not reacting with the solvent as much. And then in this situation, fluoride is actually the best nucleophile, followed by chloride, followed by bromide, followed by iodide. So here, you're going in the direction of basicity. This is the best. This is the worse in an aprotic solvent. If it was in a protic solvent, this is flipped around. This becomes the best and this becomes the worst.