Main content

## Galvanic cells

Current time:0:00Total duration:9:06

# Lead storage battery

## Video transcript

- [Voiceover] Here's the reaction for a lead storage battery. Solid lead plus lead
dioxide gives lead sulfate. Our goal is to balance this redox reaction in acidic solution. For a lead storage battery, you're dealing with sulfuric acid. In a previous video I've already gone over how to balance a redox
reaction in acidic solution. So this video is just a review of that one using the lead storage
battery as an example. The first thing we need to do
is assign oxidation states. And we'll start with solid lead. The oxidation state of an element is zero, so it's zero for solid lead. Move on to lead dioxide. For oxygen, the oxidation
state is negative two. And we have two of them, giving us negative four for the total. The sum of the oxidation
states in a neutral compound is zero, so it must be plus four for lead. We move onto lead sulfate. We know that sulfate is SO four two minus, therefore we're dealing
with lead two plus. The lead at two plus cations. So the oxidation state is plus two. Next we write our oxidation half-reaction. So what is being oxidized here? Solid lead is going from
an oxidation state of zero to an oxidation state of plus two. That's an increase in the oxidation state. So that's oxidation. So we write down here
solid lead is going to lead two plus ion for our oxidation. We have sulfate present, so we need to have sulfate on both sides. So if we have solid lead
plus SO four two minus, that goes to lead sulfate, PbSO four. Next we look at our atoms. And we have one lead on the left and one lead on the right. One sulfur on the left,
one sulfur on the right. Four oxygens on the left and
four oxygens on the right. All of our atoms are balanced. We move on to balancing the charge. You balance charge by adding electrons. So let's figure out how many
electrons we need to add and where do we add them? On the left side we have
two negative charges. On the right side our
overall charge is zero. So we need to make those charges equal. And we can do that by adding two electrons to the right side. So now the charges are balanced. Remember, oxidation is loss of electrons. So this is the half-reaction that occurs at the anode of our battery. Next we want to do the
reduction half-reaction. So we need to write down
our reduction half-reaction. We can see that we're going
from plus four to plus two. That's a decrease in the oxidation state. So for our reduction half-reaction, it would be PbO two going to Pb two plus. Once again we need to add in our sulfate, since that is present. So on the left side we would have PbO two plus SO four two minus. And then going to PbSO four on the right. Next we need to balance our atoms. So we'll start with lead. One lead on the left,
one lead on the right. And once that's done and
the sulfur's balanced too, one sulfur on the left,
one sulfur on the right, we look at oxygen. So let's look at the left side here. So we have two oxygens here and four here, for a total of six oxygens. So six oxygens on the left. And on the right we have four oxygens. So four oxygens on the right. You balance oxygen by adding water. So we need two oxygens on the right side. So we can get that by adding two waters. So if we add two waters, now we have the proper number of oxygens. We just added two more
oxygens to the right side. Next we balance hydrogens
by adding H plus. So let's look at the right side. We have four hydrogens on the right. And on the left we have zero. We have zero hydrogens so we need, we need to add four
protons to the left side of our half-reaction. So if we add four
protons to the left side, now hydrogen balances. We have four on both sides. Next we balance charge. So what's the overall
charge on the left side? We have four positive charges here and two negative charges. So we have a total of two
plus on the left side. On the right side, it would be zero. So we need to add, we need to add two
electrons to the left side. If we add two electrons to the left side, we get our charges balanced. So now we have our
reduction half-reaction. Our reduction half-reaction occurs at the cathode of our battery. So let's add our two
half-reactions together. And we can do this because we have the same number of electrons. So let me, let me box this half-reaction. So for our oxidation half-reaction
we lost two electrons. And for our reduction half-reaction
we gained two electrons. So those electrons cancel out. So we're gonna add our two
half-reactions together to get the overall reaction
for a lead storage battery. So let's add all of our reactants. Let's start with these up here. So we're going to have
solid lead and sulfate. Let's start by writing that. So we have Pb plus SO four two minus. And then for our reactants
down here we have four H plus plus PbO two plus SO four two minus. So we have four H plus plus PbO two plus SO four two minus. For the products we have PbSO four, so we have PbSO four, and then down here we have
PbSO four and two H two O. So PbSO four plus two H two O. We've already cancelled out the electrons. So we don't need to worry about that. Let's simplify this. So how could we simplify this? On the left side we have lead, so Pb, plus PbO two. So Pb plus PbO two. Then we have four H plus, so four H plus. And then we have two sulfates. We have two sulfates here. So we'll write two SO four two minus. And then for the products
we have two PbSO fours. So that would be two PbSO four plus, that's a four here, plus two H two O. Alright, so we've finally done it. This is our overall reaction
for a lead storage battery. And sometimes you might see this written a little bit different in a textbook. You might see two of these protons added on to these two sulfates to give you two HSO four minus, leaving two protons left over. So two H plus, so that's
just another way to write what's happening here. So this is, this is a voltaic cell. You get a voltage out of this
spontaneous redox reaction. And one of these cells has
about positive two volts. So the cell potential is about positive two volts. So if you take six of these
cells and add them together, you get a car battery. And a car battery has a total of 12 volts. So six cells, each one with two volts. When the car battery discharges, the spontaneous redox reaction delivers a current and
your car engine starts. Once your car is running,
the reaction is reversed. And that allows you to recharge
your lead storage battery. The reverse reaction is ready to go, because your lead sulfate here is a solid. So if we go back and looks
at our half-reactions, for our half-reactions here we have lead sulfate for both of them. And it's a solid that
precipitates on your electrodes. And so therefore the reverse
reaction is ready to go. And you can recharge your battery. So first you could think
about this as a voltaic cell, which produces a current using
a spontaneous redox reaction. And then you can think
about an electrolytic cell. A current is used to
recharge your battery. A current is used to drive
a non-spontaneous reaction. And so a lead storage
battery is rechargable and that makes it very
useful in car batteries. They last an extremely long time.