A conservative force exists when the work done by that force on an object is independent of the object's path. Instead, the work done by a conservative force depends only on the end points of the motion. An example of a conservative force is gravity. Created by David SantoPietro.
Want to join the conversation?
- when can the mechanical energy be negative(real life example)?(8 votes)
- Mech. E = KE + PE
KE is never negative, and it can only be 0 if the object is not moving.
PE, however can be negative. In fact, PE is very often negative, but an extremely important fact about PE is that it is always up to YOU to decide what position is the PE = 0 position. For example, we usually say that gravitational potential energy PEg = mgy, where y is the height of the object. But the y = 0 height can be whatever you want. It can be the height where the object starts, where it finishes, the height of the ground level, or any other height. We just make the choice that we think will make calculations easiest. So to give you an example, if we are holding an object at y = 0 (say, ground level), and our friend is down in a hole (say, y = -10m), and we drop the object and he catches it and holds it at rest, then it has KE = 0 and PE = mgy < 0, so ME < 0.
Here is another very real-life example: the earth has negative mechanical energy, if you ask almost any astronomer! The reason is that the earth is "down in a hole" relative to the sun's gravitational pull. It has some KE, since it is moving in its orbit, but not enough to get free from the sun. Most astronomers choose to say that if an object has enough KE to get free from a big gravitational object, then it has positive ME, but if it is trapped by the big object, then the negative PE is greater in magnitude than the positive KE, so the ME is negative.(33 votes)
- Right near the end of the video it is stated that the thermal energy is dissipated into the ground and into the block, but doesn't it also radiate into the surrounding air?(8 votes)
- A problem in my physics book involves a mass hanging from a rope. It is pushed to the right by an applied variable force. It begins at rest and ends at rest. One of the parts of the question asks what is the work done by the tension in the rope. I reasoned that the work done by tension was a constant force and took the dot product of tension with the displacement of the mass to come up with an answer that it did some negative work on the mass. The answer in the book says that the work done was zero. Is this because it starts and ends at rest, or is it because the applied force is doing the work?(3 votes)
- If the force is always perpendicular to the displacement, as is the case with rope tension and a hanging mass, then the work will be zero since work is the dot product of force and displacement. The work that was done is by you when you lift the mass before releasing it.(10 votes)
- can an object have PE and KE at the same time?
like a bird flying -does it possess PE or KE?(4 votes)
- I think so. A good example of this is when something is in the middle of falling due to gravity. Some of its energy is kinetic because gravity has moved it down from its original position. At the same time, if the object hasn't hit the ground yet, it still has some gravitational potential energy yet to be transferred into kinetic energy.(1 vote)
- As explained above, we came to know that mass spring system is a conservative system, but wait, when the block attatched to the spring moves to and fro, it is also subjected to frictional force. So in this case it should be a non-conservative system rather than the conservative.
Why is it so that the mass spring system is a conservative system?(2 votes)
- In a real world situation there will be frictions forces and cause the system to be non-conservative. In most example systems you work with while learning physics you simplify them so that you deal with one aspect at a time.(5 votes)
- what is meant by Torque?(2 votes)
- how can we know that a force is path dependent?(2 votes)
- Having the force's equation, we can find it, but it is required to know how to find a function's curl. For example, if you calculate the curl of any force of the type F = f(r) --- (function of radius only), like gravity (k/r²), it will result in 0. Having curl equal to 0 will immediately imply that force field is conservative. If curl is not 0, the force field will not be conservative.(3 votes)
- If i go for A to B in a straight line and in a semicircular path then the work done by friction will be same?
it should be same because work done = force*
displacement. hence if it is same then how is non conservative force path independent(2 votes)
- intuitively, I do not think the work done by friction will be the same. The longer the path, the more work will be done against fristion(1 vote)
What's a conservative force? Conservative forces are any force wherein the work done by that force on an object only depends on the initial and final positions of the object. In other words, the work done by a conservative force on a mass does not depend on the path taken by that mass. If the work done by a force follows this rule, then we call it a conservative force. For instance, the gravitational force on a 5 kilogram mass is 49 newtons. If the mass moves downwards by an amount of 6 meters, the work done by gravity is going to be 294 joules. Now let's start over. Say the mass again moves down 6 meters. But then it moves up 6 meters, then down again 6 meters. The work done by gravity for the first downwards trip was 294 joules. Then for the upwards trip, since the gravitational force is pointing in the opposite direction of the motion of the mass, the work done by gravity is going to be negative 294 joules. Then for the last trip downwards, the work again is positive 294 joules. That means that the total work done on the mass from gravity is still 294 joules, just like it was when the mass was lowered only once. In other words, the work done by the gravitational force doesn't depend on the specifics of the path taken by the mass. The work done by gravity only depends on the initial and final position of the mass. In fact, you could allow the mass to take any path from this initial point to the final point, and the work done by gravity is still just going to be 294 joules. Because the work done by gravity doesn't depend on the path taken, we call gravity a conservative force. The force exerted by a spring is another example of a conservative force. The total work done on a mass by a spring does not depend on the path taken by the mass. It only depends on the initial and final positions of the mass. The term conservative comes from the fact that conservative forces conserve mechanical energy, whereas non-conservative forces do not conserve mechanical energy. Mechanical energy is kinetic energy and potential energy. An example of a non-conservative force is friction. If I move a mass along a table from point A to point B, friction does a certain amount of negative work on the mass, which creates some thermal energy. If instead of going straight from A to B, I make the block go from A to B back to A over and over again, the work done by friction will become larger and larger. And it'll generate more and more thermal energy. Because the work done by friction depends on the path taken, friction is not a conservative force. Similarly, air resistance is not a conservative force since the work done by air resistance depends on the specifics of the path taken. It's useful to note that if a force is conservative, you could define a potential energy for that force. That's why conservative forces like gravity and spring forces have potential energies associated with them. And non-conservative forces like friction do not have potential energy associated with them. This makes sense because if you do work against the gravitational force by lifting a mass in the air, you can get that energy back out by letting the mass fall down, turning potential energy into kinetic energy. Similarly, if you do work against the spring force by compressing a spring, you can get that energy back out by letting the spring decompress, which turns the stored potential energy into kinetic energy. But if you do work against the force of friction, you'll have a hard time trying to get that energy back out. The energy's been dissipated into the form of thermal energy and is now randomly distributed along the ground and into the block.