The fluid mosaic model of the plasma membrane. Protein, lipid, and carbohydrate components of the membrane.
Each cell of your body is encased in a tiny bubble of membrane. This membrane has about the consistency of...salad oil. The first time I read that factoid, I didn't find it very reassuring! Salad oil seems like an awfully fragile boundary to place between a cell and the rest of the world. Luckily, the plasma membrane turns out to be very well-suited to its job, salad oil texture and all.
What exactly is its job? The plasma membrane not only defines the borders of the cell, but also allows the cell to interact with its environment in a controlled way. Cells must be able to exclude, take in, and excrete various substances, all in specific amounts. In addition, they must able to communicate with other cells, identifying themselves and sharing information.
To perform these roles, the plasma membrane needs lipids, which make a semi-permeable barrier between the cell and its environment. It also needs proteins, which are involved in cross-membrane transport and cell communication, and carbohydrates (sugars and sugar chains), which decorate both the proteins and lipids and help cells recognize each other.
Here, we’ll take a closer look at the different components of the plasma membrane, examining their roles, their diversity, and how they work together to make a flexible, sensitive, and secure boundary around the cell.
Fluid mosaic model
The currently accepted model for the structure of the plasma membrane, called the fluid mosaic model, was first proposed in 1972. This model has evolved over time, but it still provides a good basic description of the structure and behavior of membranes in many cells.
According to the fluid mosaic model, the plasma membrane is a mosaic of components—primarily, phospholipids, cholesterol, and proteins—that move freely and fluidly in the plane of the membrane. In other words, a diagram of the membrane (like the one below) is just a snapshot of a dynamic process in which phospholipids and proteins are continually sliding past one another.
Interestingly enough, this fluidity means that if you insert a very fine needle into a cell, the membrane will simply part to flow around the needle; once the needle is removed, the membrane will flow back together seamlessly.
Image of the plasma membrane, showing the phospholipid bilayer with peripheral and integral membrane proteins, glycoproteins (proteins with a carbohydrate attached), glycolipids (lipids with a carbohydrate attached), and cholesterol molecules.
The principal components of the plasma membrane are lipids (phospholipids and cholesterol), proteins, and carbohydrate groups that are attached to some of the lipids and proteins.
- A phospholipid is a lipid made of glycerol, two fatty acid tails, and a phosphate-linked head group. Biological membranes usually involve two layers of phospholipids with their tails pointing inward, an arrangement called a phospholipid bilayer.
- Cholesterol, another lipid composed of four fused carbon rings, is found alongside phospholipids in the core of the membrane.
- Membrane proteins may extend partway into the plasma membrane, cross the membrane entirely, or be loosely attached to its inside or outside face.
- Carbohydrate groups are present only on the outer surface of the plasma membrane and are attached to proteins, forming glycoproteins, or lipids, forming glycolipids.
The proportions of proteins, lipids, and carbohydrates in the plasma membrane vary between different types of cells. For a typical human cell, however, proteins account for about 50 percent of the composition by mass, lipids (of all types) account for about 40 percent, and the remaining 10 percent comes from carbohydrates.
Phospholipids, arranged in a bilayer, make up the basic fabric of the plasma membrane. They are well-suited for this role because they are amphipathic, meaning that they have both hydrophilic and hydrophobic regions.
Chemical structure of a phospholipid, showing the hydrophilic head and hydrophobic tails.
The hydrophilic, or “water-loving,” portion of a phospholipid is its head, which contains a negatively charged phosphate group as well as an additional small group (of varying identity, “R” in the diagram at left), which may also or be charged or polar. The hydrophilic heads of phospholipids in a membrane bilayer face outward, contacting the aqueous (watery) fluid both inside and outside the cell. Since water is a polar molecule, it readily forms electrostatic (charge-based) interactions with the phospholipid heads.
The hydrophobic, or “water-fearing,” part of a phospholipid consists of its long, nonpolar fatty acid tails. The fatty acid tails can easily interact with other nonpolar molecules, but they interact poorly with water. Because of this, it’s more energetically favorable for the phospholipids to tuck their fatty acid tails away in the interior of the membrane, where they are shielded from the surrounding water. The phospholipid bilayer formed by these interactions makes a good barrier between the interior and exterior of the cell, because water and other polar or charged substances cannot easily cross the hydrophobic core of the membrane.
Image of a micelle and a liposome.
Thanks to their amphipathic nature, phospholipids aren’t just well-suited to form a membrane bilayer. Instead, this is something they’ll do spontaneously under the right conditions! In water or aqueous solution, phospholipids tend to arrange themselves with their hydrophobic tails facing each other and their hydrophilic heads facing out. If the phospholipids have small tails, they may form a micelle (a small, single-layered sphere), while if they have bulkier tails, they may form a liposome (a hollow droplet of bilayer membrane).
Proteins are the second major component of plasma membranes. There are two main categories of membrane proteins: integral and peripheral.
Image of a single-pass transmembrane protein with a single membrane-spanning alpha helix and a three-pass transmembrane protein with three membrane-spanning alpha helices.
Integral membrane proteins are, as their name suggests, integrated into the membrane: they have at least one hydrophobic region that anchors them to the hydrophobic core of the phospholipid bilayer. Some stick only partway into the membrane, while others stretch from one side of the membrane to the other and are exposed on either side. Proteins that extend all the way across the membrane are called transmembrane proteins.
The portions of an integral membrane protein found inside the membrane are hydrophobic, while those that are exposed to the cytoplasm or extracellular fluid tend to be hydrophilic. Transmembrane proteins may cross the membrane just once, or may have as many as twelve different membrane-spanning sections. A typical membrane-spanning segment consists of 20-25 hydrophobic amino acids arranged in an alpha helix, although not all transmembrane proteins fit this model. Some integral membrane proteins form a channel that allows ions or other small molecules to pass, as shown below.
Peripheral membrane proteins are found on the outside and inside surfaces of membranes, attached either to integral proteins or to phospholipids. Unlike integral membrane proteins, peripheral membrane proteins do not stick into the hydrophobic core of the membrane, and they tend to be more loosely attached.
Carbohydrates are the third major component of plasma membranes. In general, they are found on the outside surface of cells and are bound either to proteins (forming glycoproteins) or to lipids (forming glycolipids). These carbohydrate chains may consist of 2-60 monosaccharide units and can be either straight or branched.
Along with membrane proteins, these carbohydrates form distinctive cellular markers, sort of like molecular ID badges, that allow cells to recognize each other. These markers are very important in the immune system, allowing immune cells to differentiate between body cells, which they shouldn’t attack, and foreign cells or tissues, which they should.
The structure of the fatty acid tails of the phospholipids is important in determining the properties of the membrane, and in particular, how fluid it is.
Saturated fatty acids have no double bonds (are saturated with hydrogens), so they are relatively straight. Unsaturated fatty acids, on the other hand, contain one or more double bonds, often resulting in a bend or kink. (You can see an example of a bent, unsaturated tail in the diagram of phospholipid structure that appears earlier in this article.) The saturated and unsaturated fatty acid tails of phospholipids behave differently as temperature drops:
- At cooler temperatures, the straight tails of saturated fatty acids can pack tightly together, making a dense and fairly rigid membrane.
- Phospholipids with unsaturated fatty acid tails cannot pack together as tightly because of the bent structure of the tails. Because of this, a membrane containing unsaturated phospholipids will stay fluid at lower temperatures than a membrane made of saturated ones.
Most cell membranes contain a mixture of phospholipids, some with two saturated (straight) tails and others with one saturated and one unsaturated (bent) tail. Many organisms—fish are one example—can adjust physiologically to cold environments by changing the proportion of unsaturated fatty acids in their membranes. For more information about saturated and unsaturated fatty acids, see the article on lipids.
In addition to phospholipids, animals have an additional membrane component that helps to maintain fluidity. Cholesterol, another type of lipid that is embedded among the phospholipids of the membrane, helps to minimize the effects of temperature on fluidity.
At low temperatures, cholesterol increases fluidity by keeping phospholipids from packing tightly together, while at high temperatures, it actually reduces fluidity. In this way, cholesterol expands the range of temperatures at which a membrane maintains a functional, healthy fluidity.
The components of the plasma membrane
|Phospholipids||Main fabric of the membrane|
|Cholesterol||Tucked between the hydrophobic tails of the membrane phospholipids|
|Integral proteins||Embedded in the phospholipid bilayer; may or may not extend through both layers|
|Peripheral proteins||On the inner or outer surface of the phospholipid bilayer, but not embedded in its hydrophobic core|
|Carbohydrates||Attached to proteins or lipids on the extracellular side of the membrane (forming glycoproteins and glycolipids)|
Table modified from OpenStax Biology.
Want to join the conversation?
- what is between the phospholipid bilayer?(28 votes)
- Since the polor ends of the phospholipids face the outer/ inner surface of the cell. They are in contact with the inter/outer cellular fluid predominantly water, glycoproteins,glycolipids, However the hydrophobic tails inter twin with each other forming the enter space between the polor heads. The space between the polor heads would contain saturated and unsaturated fatty acids which forms these tails. This gives them a slight negative polarity. With these fatty acid tail ( bent or straight) we would find a mosaic of integral proteins, cholesterol,. and yes, water molecules passing threw!(10 votes)
- So with that example of the pinhead touching the fluid membrane (and the membrane flowing out of the way), I'm wondering how a person can bleed if all cell membranes do this. As in why don't sharp objects like pins and needles go straight through (I know it sounds silly) our skin without drawing blood?(9 votes)
- Bleeding occurs when veins are torn out. When you pass a pin through your skin ,the pinhead is literally much bigger than the individual cell for the pinhead to pass through the said cell membrane.So you can guess the pin must torn out some small veins on its way into your skin,not into an individual cell.Moreover there is no blood inside a cell or cell membrane for it to come out.Hope this clears your doubt(21 votes)
- What is meant by "Transmembrane proteins may cross the membrane just once, or may have as many as twelve different membrane-spanning sections." I don't understand the twelve different membrane-spanning sections part.(9 votes)
- I think it looks like three-pass transmembrane protein (in the first picture about proteins) only having 12 sections instead of 3.(5 votes)
- Why do we have proteins in the cell membrane?(6 votes)
- What are lipid rafts, what are they made of and whats their function? and where in the plasma membrane are they located?
thank you!(4 votes)
- Lipid rafts are regions within the plasma membrane that are more rigid than the surrounding membrane.
They are made of the same components as the rest of the membrane, but in differing amounts — for example they contain much more cholesterol.
AFAIK their function is not completely clear, but they may help concentrate certain membrane proteins in a way that makes some cell processes more efficient.
There is an extensive wikipedia article on this that you may find interesting:
This article might also be worth reading:
- fluid mosaic model is cell of ??(0 votes)
- That's not correct .... the fluid mosaic model is a model of the plasma membrane which is present in ALL cells, both eukaryotic and prokaryotic, single-celled and multi-cellular organisms.(25 votes)
- How does the phospholipid head not just dissolve in water?(3 votes)
- Does anyone know what function or process can occurs through the proteins embedded in cell membrane.(1 vote)
- Some proteins allow for active transport. Others act as signal receptors for processes like cell signaling and endocytosis (a cell takes in some material from the outside). Certain proteins can also act as identifiers for the cell, allowing the immune system to recognize it rather than destroy it (you don't want your body to destroy itself).
Does this help?(4 votes)
- What is the function of integral and peripheral proteins?(2 votes)
- There are many different functions for different members of each of these categories of membrane associated proteins!
- Is it that the proteins create a space in the phospholipid bilayer(Membrane) which serve as a passageway.(2 votes)
- Exactly. Channel proteins form open pores through phospholipid bilayer create tunnels for any molecule which is an appropriate size. Usually, ions such as Na, K, Ca, across the membrane.
Have a look at this may be helpful: