Main content

### Course: Math (NSDC) - English > Unit 10

Lesson 9: Quadrilaterals part 2# Kites as a geometric shape

The video dives into the world of quadrilaterals, specifically focusing on kites. It explores how kites are defined by two pairs of adjacent, congruent sides. It also highlights that the diagonals of a kite intersect at a 90-degree angle, with one line bisecting the other. Created by Sal Khan.

## Want to join the conversation?

- Would a diamond classify as a rhombus?(48 votes)
- You are correct that A diamond is a rhombus, but the reversing the implication doesn't always give the same result. For example, a square classifies as a rectangle, but a rectangle may not classify as a square.(12 votes)

- Is a kite a paralelogram(12 votes)
- In Euclidean geometry, a kite is a quadrilateral whose four sides can be grouped into two pairs of equal-length sides that are adjacent to each other. In contrast, a parallelogram also has two pairs of equal-length sides, but they are opposite to each other rather than adjacent.(5 votes)

- what does purpendicular bisector mean?(10 votes)
- Cventura , the spelling is perpendicular bisector any way ... it means imagine there is a line and the length of it is 10cm , and now you draw another line crossing the middle point of that 10cm line and in the crossing point (Intersection point) you get a 90 degree angle made from the two lines. That is a perpendicular bisector line, and it divides the line into to 5cm parts.

for a keyboard example;

The letter " T " you see in the middle ... two lines get crossed and makes a 90 degree angle !

As the above Tristan said , it has to go from the middle of a certain line (which means divides into two equal parts) and also it has to make a 90 degree angle by both lines.

some think that the perpendicular line we draw has to stop by the 1st line like a upside down T , no it is not it can continue even after that making a Cross.(9 votes)

- So a kite by definition could be a parallelogram? I’ve read two different opinions. One says a kite is not a parallelogram so it cannot be a rhombus. By the definition used in this video, however, it could be a parallelogram.(5 votes)
- Well, I like to think of a Kite as a Wish.com Rhombus. It's not congruent on all 4 sides, but 2 pairs are congruent. If you think about it, a rhombus is the product of a parallelogram and a kite.

So the most common identification of a kite is that it is**not**a parallelogram, but is a variant of a rhombus.

Hope that made sense! - PM(6 votes)

- What does Conguent mean?(6 votes)
- (of figures) identical in form; coinciding exactly when superimposed.(5 votes)

- What are "perpendicular bisectors of each other"?(5 votes)
- a perpendicular bisector is when a line cuts another line in half, the other line must be at a right angle to the line its cutting in half. if 2 lines are perpendicular bisectors of each other then they both cut each other in half and they meet at their midpoints(5 votes)

- Aren't diamonds and kites the same?(3 votes)
- No. The word "diamond" is used for a shape with 4 sides where all sides are equal. Other names for a diamond are "rhombus" or "equilateral quadrilateral" (which is basically just Latin for "4-sided shape with equal sides").

A kite on the other hand is also 4-sided, but it has pairs of equal sides. So it can have 2 sides which are 4 units long while the other 2 sides are only 3 units long. The diamond is a special case of the kite: one where**all**sides are equal, not just the pairs.(7 votes)

- What is the difference between a Rhombi and a Rhombus? Is one Smaller than the other?

( i made a kite :3 <+>~~~~~ )(4 votes)- There is no difference. Rhombi is just the plural form of rhombus.(5 votes)

- which shapes have adjacent sides. What is the root word for adjacent?(5 votes)
- I'm not sure, but adjacent means "next to".(3 votes)

- What exactly does it mean to bisect something?(3 votes)
- Bi is the Latin word for two, and sect means cut. So bisect means to cut or divide in two equal parts. Hope this helps!(7 votes)

## Video transcript

In everyday language, we
know what a kite means. It's these flimsy things
that we take to the beach to fly in the wind
with our families. But you could imagine
mathematicians have looked at the general
shape of these kites, or at least the way
they're drawn in cartoons, and say, well, that's
an interesting shape in its own right. Let's also make this
a mathematical term. This is a shape
like a parallelogram or like a rhombus. It's just another
type of quadrilateral. But in order for it to be used
in mathematics in a useful way, we have to define it a
little bit more precisely. So let's see if we can
come up with a couple of interesting definitions
of what a kite could be or a couple of interesting
ways to construct a kite. Well, one way that you
could think about a kite is it looks like it
has two pairs of sides that are congruent
to each other. So, for example, it looks
like this side and this side need to be congruent
to each other. So let's make that a constraint. And they touch each other. They have a shared
common endpoint. So you have one pair
of congruent sides that's adjacent to each other. They have a common endpoint. And then you have
another pair of sides that are congruent
to each other. And they are adjacent. They share a common endpoint. So one definition that
you could make for a kite is that you have two
pairs of congruent sides, where the congruent
sides are adjacent. And you might say, well,
what's the other alternative? If the congruent
sides aren't adjacent, what else could they be? Well, the congruent sides
could be opposite each other. And what happens if
you were to do that? So if these two
sides are congruent, but they didn't have
a common endpoint, we're still dealing
with a quadrilateral. What would it look like? Well, you would have
one congruent site here, and that would be congruent
to this side right over here. And then you would have a
congruent side right over here that is congruent to this side. This would be a
situation where you have two pairs of
congruent sides, but they're not adjacent. They don't have any common
endpoints with each other. Each side in the
congruent side pair, they're opposite to each other. So here, once again,
we get a quadrilateral. We still get four sides. A kite is a quadrilateral. This is a quadrilateral. But this isn't a kite. This right over here
is a parallelogram, and we've seen that
multiple times before. But kites can also
be constructed in other interesting ways. You might see that what looks
right here, that these two diagonals of this kite
are perpendicular. And that indeed-- and
I'm not going to prove it here-- is a
property of a kite. These two lines,
these two diagonals, intersect at a 90-degree angle. The other thing we
know about kites is that one of these lines is
bisecting the other of the two. So you could actually
construct a kite that way. You could start with
a line, and then you could construct a
perpendicular bisector of that line,
another segment that bisects it at a 90-degree angle. So here, there you go. So that bisects
it, so that means that this segment is
equal to this segment. We split it in two. And then if you connect the
endpoints of the segments, you should get a kite. And you will indeed get a kite. So it would look
something like this. And once again, this
segment is congruent to this adjacent
segment, and this segment is congruent to this
adjacent segment. But what would happen if
these two diagonals are both perpendicular
bisectors of each other? So what would happen
in this scenario, where-- let me draw one segment. And then I'm going to
make another segment, but they're going
to be perpendicular bisectors of each other. So let's do that. So now they're both
perpendicular bisectors of each other. So this segment is
equal to this segment, and this segment is
equal to this segment. Well, now, once again,
you still have a kite, but now you're also
satisfying the constraint for another type of
quadrilateral that we've seen. So now you're satisfying
the constraint. All your sides are equal. All of your sides are parallel. You're now dealing with
a rhombus, which is also a special type of parallelogram. And then if you were
to go even further, where these two diagonals
have the exact same length and they're both perpendicular
bisectors of each other, so you have both the
exact same length. I'll try to draw it
as cleanly as I can. So they're both the
exact same length, and they're both perpendicular
bisectors of each other. So each of these halves would
be the same length as well. Then you have a subset of--
I guess I could say-- rhombi, and you get to a square. So one way of thinking
about it is any square is also a rhombus. And any rhombus is also going
to satisfy your constraints for being a kite. But there's a
bunch of types that don't satisfy your constraints
of being a rhombus or a square. A kite is just two
pairs of congruent sides that are adjacent to each
other, and they're usually pretty easy to spot out
because they look like kites.