Main content

### Course: AP®︎/College Calculus BC > Unit 6

Lesson 11: Integrating using substitution- 𝘶-substitution intro
- 𝘶-substitution: multiplying by a constant
- 𝘶-substitution: defining 𝘶
- 𝘶-substitution: defining 𝘶 (more examples)
- 𝘶-substitution
- 𝘶-substitution: defining 𝘶
- 𝘶-substitution: rational function
- 𝘶-substitution: logarithmic function
- 𝘶-substitution warmup
- 𝘶-substitution: indefinite integrals
- 𝘶-substitution: definite integrals
- 𝘶-substitution with definite integrals
- 𝘶-substitution: definite integrals
- 𝘶-substitution: definite integral of exponential function

© 2024 Khan AcademyTerms of usePrivacy PolicyCookie Notice

# 𝘶-substitution with definite integrals

Performing $u$ -substitution with definite integrals is very similar to how it's done with indefinite integrals, but with an added step: $\int}_{1}^{2}{2x}{(}{{x}^{2}+1}{{)}^{3}}{\textstyle \phantom{\rule{0.167em}{0ex}}}{dx$ .

**accounting for the limits of integration**. Let's see what this means by findingWe notice that ${2x}$ is the derivative of ${{x}^{2}+1}$ , so $u$ -substitution applies. Let ${u={x}^{2}+1}$ , then ${du=2x{\textstyle \phantom{\rule{0.167em}{0ex}}}dx}$ . Now we substitute:

Wait a minute! The limits of integration were fitted for $x$ , not for $u$ . Think about this graphically. We wanted the area under the curve ${y=2x({x}^{2}+1{)}^{3}}$ between $x=1$ and $x=2$ .

Now that we changed the curve to ${y={u}^{3}}$ , why should the limits stay the same?

Indeed, the limits ${u}$ correspond to ${{x}^{2}+1}$ for $x={1}$ and $x={2}$ :

*shouldn't*stay the same. To find the new limits, we need to find what values of- Lower bound:
$({1}{)}^{2}+1={2}$ - Upper bound:
$({2}{)}^{2}+1={5}$

Now we can correctly perform the $u$ -substitution:

From here on, we can solve everything according to $u$ :

**Remember:**When using

*Want more practice? Try this exercise.*

## Want to join the conversation?

- Alright, I really wanted to see the difference in bounds graphically, and this is nice. However, I am confused. If (u^3)(du) = 2x(x^2+1) dx, then how are the graphs different? I thought du and dx were both just the bases of an infinite number of rectangles and they both approached zero.

What actually happens when we substitute a variable or when we take the integral with respect to a different variable? I thought they would be equivalent, but now I'm more confused.(2 votes)- Good question! I'll try to put in a simple manner.

So, we have two variables here: x and u. Think of it as two worlds: the (x,f(x)) worlds (where input is x and output is f(x)) and the (u,f(u)) world (where input is u and output is f(u)). Now, the graph will look different in both these worlds. What a u-substitution does is that it creates a map from the x world to the u world (i.e. the substitution we make maps every value of x to a corresponding value of u). As a result, every point is mapped onto a new coordinate system where u = x^2 + 1. This makes our graph into something we can easily find the area under.

Also, a more solid reason as to why the graphs will be different is because of the substitution. See that u = x^2 + 1. If u = x, then the graphs would be the same. But, u = x is a useless substitution, as it just changes the variable and doesn't make anything easier for us.

If you can understand this idea, and you choose to pursue calculus in the future, this visualization helps tremendously when you reach multivariable calculus.(8 votes)

- I am having difficulty understanding how to use the differential of du dx. In problem 2 above, how did 15x^2 turn to be 5*3*x^2?(2 votes)
- They are equivalent is the short answer.

Long answer is, since u was chosen to be x^3 - 7 the derivative is 3x^2, so we want something to substitute that in for. really the important part is x^2. as long as that exists you can "factor out" a 1/3 and then you'll have 1/3 * 3x^2 and have what you need to substitute.

Luckily, there is 15x^2, and if you factor out a 5 you get the 3x^2 you need, which is where 5*3x^2 came from.

Does that help? if not I can maybe try walking through it differently than the problem.(8 votes)

- Could someone please explain how

∫sec(u)tan(u)du

=sec(u)+C

Tnx!(1 vote)- The identity sec x d/dx = sec(x)*tan(x) is well known. So the answer is just reverse chain rule.(3 votes)

- what if the bounds get flipped after changing them as in you would be integrating from a to b when b<a can you still leave the u sub or do you have to swap them(1 vote)
- If the bounds become inverted (b<a) due to a u-sub, it is typically best switch them back. It is OK to switch the bounds as long as you add a negative out front of the integral to make up for it.

If you don't fix the "backwards bounds" you will still end up with the same answer in the end. However, it's good practice to swap them and add the negative.(1 vote)

- I am extremely confused on u-substitution, if the integral was the same thing except going from -1 to 2 instead of 1 to 2, wouldn't u range from 2 to 5? Therefore, you would get the exact same answer even with a different range. In this particular case, it wouldn't matter because the graph of y=2x(x^2+1)^3 is an odd function and the negative area from -1 to 0 would cancel out the positive area from 0 to 1, but in other general cases the u expression might give the same range even though the original range is different. For example, if the u expression has the same output for multiple inputs, then multiple different inputs to the u expression might give the same range especially if the u expression contains a "wavering" function like sin or cos that gives the same output to an infinite number of inputs.(1 vote)
- Why does the definite integral of u^3 from 2 to 5 has the same area as the definite integral of 2x(x^2+1)^3 from 1 to 2?(1 vote)
- So I am assuming you have used u-substitution. You can look up the the theorem to confirm it works.(1 vote)

- i tried to plot graph of 2x(x^2 + 1)^3 and (x^2 + 1)^3 , but why am i not getting the same graphs as depicted? we are trying to find area under curve given the bounds only right?(1 vote)
- What you have there is the anti-derivative, not the definite integral, so it is a completely separate graph entirely(1 vote)

- I am working on a question like this and having trouble. It is asking me to find the area between the curve y=xsqrt(4-x^2) and the x-axis over the interval [-2, 2].

I am mostly confused on how not to get zero as an answer. Should I break it into multiple parts?(1 vote)- 𝑓(𝑥) = 𝑥√(4 − 𝑥²)

𝑥 ∈ (−2, 0) ⇔ 𝑓(𝑥) < 0

Thus, the (positive) area is

𝐴 = ∫[0, 2] 𝑓(𝑥)𝑑𝑥 − ∫[−2, 0] 𝑓(𝑥)𝑑𝑥

However, because 𝑓(𝑥) is an odd function, we can just write

𝐴 = 2 ∙ ∫[0, 2] 𝑓(𝑥)𝑑𝑥(1 vote)

- Can you substitute the original expression with x for u and then use the same boundaries? In the example, would (x^2+1)^4/4 for [1,2] work?(1 vote)
- Yes, after taking the antiderivative with respect to 𝑢, we can substitute back to get the antiderivative as a function of 𝑥 and evaluate that for the original boundaries.(2 votes)