- 1. Bit-zee
- 2. Bit-zee (long version)
- 3. Bit-zee Bot Introduction
- 4. Bit-zee planning and propulsion
- 5. Bit-zee's bits
- 6. Bit-zee's chassis/frame
- 7. Bit-zee's wheel mounts and fenders
- 8. Bit-zee's component mounting holes
- 9. Bit-zee's batteries
- 10. Improving the battery wires
- 11. Connecting Bit-zee's power wires and on-off switch
- 12. Bit-zee's motors
- 13. Why does Bit-zee need a motor controller?
- 14. Bit-zee's motor controller
- 15. Attaching and wiring Bit-zee's motor controller
- 16. Attaching Bit-zee's Arduino
- 17. How to hotwire a digital camera
- 18. Attaching Bit-zee's digital camera
- 19. Bit zee's 5 Volt power distribution board
- 20. Hacking and attaching a digital recorder/player to Bit-zee
- 21. Making a power connector for the Arduino
- 22. Attaching Bit-zee's prototype board
- 23. Connecting the motor controller to the Arduino
- 24. Connecting Bit-zee's camera to the Arduino
- 25. Bit-zee's bumper switches
- 26. Bit-zee's eyes
- 27. Bit-zee's IR sensor
- 28. Bit-zee's shell
- 29. Camera wiring update
- 30. Load the Code for It-zee and Bit-zee
30. Load the Code for It-zee and Bit-zee
1. Go to: http://arduino.cc/en/main/software and download the Arduino software for your computer's operating system
2. Launch Arduino and then go to file new

3. Go to tools and select Arduino Uno
4.Connect the USB cable to your computer and the Arduino on your Bit-zee bot.
5. Select the following serial port

6. Go to Github and download the IR code library from: https://github.com/Khan/projects/tree/master/bitzee/sketches/libraries
7. Copy the IR remote file to your Arduino library (On a mac go to finder/documents/Arduino/libraries) then put the IR remote library in the libraries file
8.Then download the code and paste it into your Arduino sketch pad. Get the code here:
git clone git://github.com/Khan/projects.git
Share a tip
Suggest a fix
Have something that's not a tip or feedback about this content?
This discussion area is not meant for answering homework questions.